Sound Deadner Where To Get It And Where To Get It Cheap

[cartunez2004]

Ebay is your friend with Sound deadner.

Meglo peal n seal is thick, I would say its very close to the same as dynamat in thickness, I have used mainly dynamate and the stinger roadkill, I used the peel n seal, in my ride because Im a cheap bastard, and it seams to work well if you prep for it and use the correct tools, will it stay on there forever? I dont know, I will never know once I glass the roof.

o so around about how much is it and what kinda prep do u need to do cause where im using it get alot of air my ports are only like 6'' away from the hatch

[Guest MegaloManiac]

to prep surface you wipe down surface with a tach clothe. make sure surface is completely clean. the cleaner the surface the better it will stick to. cause if u stick something to a dirt surface, then u r sticking to dirt and not the panel, it WILL definitely fall off. prepping is very important

if you still plan to go Peel-N-Seal route heres the link

http://www.lowes.com/lowes/lkn?action=prod...017-81326-PS625

Edited September 28, 2007 by MegaloManiac

[Slinky]

ebay. peel n seal isnt the best shit by any means. id prolly go with somethin else unless you wanted to do about 3 layers of peel n seal

[cartunez2004]

ebay. peel n seal isnt the best shit by any means. id prolly go with somethin else unless you wanted to do about 3 layers of peel n seal

where u can u get it the cheapest than something better

[01xtreme]

when I pepped my surface I went over everything with Prep-all from Car Quest, and it removes all the oil, dirt, grime, or anything else on the surface. Even Peel and seal will stick great after that stuff. I cant remember how much it was, but it isn't too expensive, and a gallon will be plenty to do your whole car.

[TeamBudweiserCG]

We use a rag and laquer thinner.

[Big P]

peal n seal ftw

[cartunez2004]

peal n seal ftw

what is that suppsoe to be pics of peel n seel

[David]

thats not peel n seal, peal n seal has foil backing

[Big P]

Its the same thing sept the top one I got from doug instead of foil it has thick fabric it seems to do really well. Ive got flowmasters dumping out under the cab and I can barely hear them. The bottom stuff is another form of peel and seal its more splash guard sealer its rubber and sticks super good but your gonna need 3 layers to = 1 layer of dynamat I ended up putting 2 more layers of the fabrick stuff over the top of it.