chewie Posted May 2, 2011 Report Share Posted May 2, 2011 (edited) i was told to buy thick ca glue by a member i didnt look to well on the ebay listing and turns out it wasnt foam safe idk i just hope the jb weld holds i think it will if not live and learn fixmyspeaker sells it on there site, along with a hardener. hobby grade thick foam safe ca glue is approx 5 dollars for enough ca to do approx 10 recones. if your not in a rush. do not use the kicker, accelerator ect ect. it causes the ca glue to become brittle. Edited May 2, 2011 by chewie Quote 91 dodge colt gt.. 4 custom t600 15s audioque 3500d.1 tuned to 25 hz... stay tuned. blazer stroker 15 brutus bxi2006d terrible voltage drop 145.4@38HZ... SEALED LEGAL Aim: chewieft09 www.t3audio.com carpe diez nuts !! my house is louder than your car... Link to comment Share on other sites More sharing options...
MACnonsence6 Posted May 2, 2011 Author Report Share Posted May 2, 2011 so when you bought the recone why didnt you just throw some ca glue in the cart right from fi? thats what i did and it all came in the box and did my recone lol. i dont understand why you would use jb weld and not ca glue. also if you have a local hobby shop you can buy ca glue there for decent price. i guess we will see the carnage when you post up the pics after a few days lol why do you think it wont hold? Quote I picked up an MTX Sw1212 powered subwoofer today. This thing sounds amazing. 130 watts, 12" woofer with a passive 12" woofer tuned to 27 hz. Moving the pictures on the walls and my girl got wet from the bass when i showed her haha. Tonight should be good haha. Link to comment Share on other sites More sharing options...
cthedinger Posted May 2, 2011 Report Share Posted May 2, 2011 60 minute Epoxy on spider landing and Amazing All Purpose Goop on the surround and Dustcap is what I have always used. Done me good so far. Hopefully the JB Weld works out good for you. Quote If you have any questions PM me or Add me on Facebook CLICK ME! Shop at ct-sounds.com Subscribe to us on YouTube Link to comment Share on other sites More sharing options...
skittlesRgood Posted May 2, 2011 Report Share Posted May 2, 2011 why didnt you use the CA glue on the spider and the jbweld on the surround? Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
MACnonsence6 Posted May 2, 2011 Author Report Share Posted May 2, 2011 (edited) why didnt you use the CA glue on the spider and the jbweld on the surround? cause that ca glue drys crazy fast so i didnt think id have enough time to get everything alined idk i did what i did and its done and its dried and im very happy Edited May 2, 2011 by hifonics10 Quote I picked up an MTX Sw1212 powered subwoofer today. This thing sounds amazing. 130 watts, 12" woofer with a passive 12" woofer tuned to 27 hz. Moving the pictures on the walls and my girl got wet from the bass when i showed her haha. Tonight should be good haha. Link to comment Share on other sites More sharing options...
chewie Posted May 2, 2011 Report Share Posted May 2, 2011 thick ca glue takes a lil while to set up.. get it shimmed and then lift stuff up and start gluing Quote 91 dodge colt gt.. 4 custom t600 15s audioque 3500d.1 tuned to 25 hz... stay tuned. blazer stroker 15 brutus bxi2006d terrible voltage drop 145.4@38HZ... SEALED LEGAL Aim: chewieft09 www.t3audio.com carpe diez nuts !! my house is louder than your car... Link to comment Share on other sites More sharing options...
MACnonsence6 Posted May 3, 2011 Author Report Share Posted May 3, 2011 been running it in a shity ported prefab box ment for to subs put a board with silicone over one of the holes ends up being a lil over 2 cubes tuned to like 47 after the subs in there. been running it on my ap1800 at 2ohms takes it really well box in the back seat of a 98 ram doesnt hit that hard but o well have to build a better box get my neons electrical up and slap it in there Quote I picked up an MTX Sw1212 powered subwoofer today. This thing sounds amazing. 130 watts, 12" woofer with a passive 12" woofer tuned to 27 hz. Moving the pictures on the walls and my girl got wet from the bass when i showed her haha. Tonight should be good haha. Link to comment Share on other sites More sharing options...
JMac91 Posted May 3, 2011 Report Share Posted May 3, 2011 Good luck. Quote Vehicle: 2002 Volvo S60 2.4t awd.Headunit: Kenwood DDX-470Doors: 4x Focal 6.5s/tweets (Adding)Sub: 2x Sundown Zv4 12's D1Amps: B2 Zero.1, MB Quart OA600.4Box: 5.2ish @ 32, Made with Maple, solid oak braces, 45s all around, 2x 5.8" pipes, all fiberglassed up.Battery: XS D3100, Block Shakers 110AHAlternator: 250A Excessive Amperage. All Sky High OFC Wiring. My Build, plenty of pics: http://www.stevemeadedesigns.com/board/topic/198281-2002-volvo-s60-awd-24t-build-log/ Link to comment Share on other sites More sharing options...
MACnonsence6 Posted May 3, 2011 Author Report Share Posted May 3, 2011 why does everyone think it wont hold Quote I picked up an MTX Sw1212 powered subwoofer today. This thing sounds amazing. 130 watts, 12" woofer with a passive 12" woofer tuned to 27 hz. Moving the pictures on the walls and my girl got wet from the bass when i showed her haha. Tonight should be good haha. Link to comment Share on other sites More sharing options...
n8ball2013 Posted May 3, 2011 Report Share Posted May 3, 2011 JBweld was never designed to hold a soft pliable material to a solid surface. Its going to rip eventually imo. two solid surfaces sure. a soft and a solid no. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.