BassMonsterZ Posted July 8, 2011 Report Posted July 8, 2011 Hi, i want to get an Hifonics Brutus BXI3000 to use with a Fi SSd 18 dual 2. Someone can tell me if the amp wires config are compatible with the Fi SSD 18 dual 2? http://www.audiodesign.de/downloads/manuals/BRUTUS_B3.pdf that is the manual, go to the page 22 to see wiring configurations.
fecupe2001 Posted July 8, 2011 Report Posted July 8, 2011 You don´t need to see that much of a manual hommie, the amplifier says it´s stable at 1 ohm, then yes, you can wire your sub to 1 ohm since it´s a DVC 2 ohms sub I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Supercharged DCs Posted July 8, 2011 Report Posted July 8, 2011 3000w to an SSD? Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
fecupe2001 Posted July 8, 2011 Report Posted July 8, 2011 That model is 1500 rms iirc I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Supercharged DCs Posted July 8, 2011 Report Posted July 8, 2011 I'm a noob then lol, I assumed like the rest of the Brutus line the model number indicated the power. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
fecupe2001 Posted July 8, 2011 Report Posted July 8, 2011 haha it´s ok, this is totally different from the brutus you know, the case looks like a small goliath or something like that, i´m too lazy to look for it on google, but yes, iirc it´s a 1500 rms amplifier.. I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
BassMonsterZ Posted July 8, 2011 Author Report Posted July 8, 2011 at 1 ohms is 1500 watt rms, and max are 3000 so to wire it at 1 ohms i have just to wire it in parallel?
18abVFL Posted July 8, 2011 Report Posted July 8, 2011 yep parallel sir 1999 Monte Carlo Sony CDX-GT34w 2 Alpine Type R 12"s in 4 cubes tuned to 35hz American Bass VFL 80.1 amp @ 1 ohm (probably doing between 1000 and 1300rms) Stock alt, Stock batt, Big 3 Upgrade Boston s55- 5 1/4s (doors) Boston s95- 6x9s (rear deck)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.