tonedeaf Posted September 3, 2011 Report Share Posted September 3, 2011 depending on your box, rise will be around 2.5 ohms. Where is your sub installed and what is it facing? Theres no way to tell where your rise will be... Quote Link to comment Share on other sites More sharing options...
RickyFriery97 Posted September 3, 2011 Report Share Posted September 3, 2011 depending on your box, rise will be around 2.5 ohms. Where is your sub installed and what is it facing? Theres no way to tell where your rise will be... unless you get a clamp meter and calculate it yourself. Rise changes with every frequency Quote 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer Link to comment Share on other sites More sharing options...
tonedeaf Posted September 3, 2011 Report Share Posted September 3, 2011 depending on your box, rise will be around 2.5 ohms. Where is your sub installed and what is it facing? Theres no way to tell where your rise will be... unless you get a clamp meter and calculate it yourself. Rise changes with every frequency Exactly. Quote Link to comment Share on other sites More sharing options...
BJD3 Posted September 3, 2011 Report Share Posted September 3, 2011 (edited) Sounds like you're wired wrong tbh. With an XS D5100 on a T1000.1bd @ .7 ohms I drop to high to mid 12s. So no voltage drop with just a 3400...idk about that. Completely stock electrical and an M1a and I have no voltage drop... EDIT:To be fair, I have a bit of light dimming on things like bass kicks (I'm in need of the big 3), but on sustained notes, nothing. Edited September 3, 2011 by BJD3 Quote Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert Link to comment Share on other sites More sharing options...
Supercharged DCs Posted September 3, 2011 Report Share Posted September 3, 2011 Sounds like you're wired wrong tbh. With an XS D5100 on a T1000.1bd @ .7 ohms I drop to high to mid 12s. So no voltage drop with just a 3400...idk about that. With a BC2000 wired at 1ohm, on stock 117A alt, single XS D3400, charging at 13.6v, my voltage actually increases with a load on it. Low volume, I rest at 13.6v constant, and at higher volumes it reaches up to 13.8v constant. It's odd, because when I previously tested out my BC2000 to make sure it worked properly, I dropped into high 12s. Now, I'm not dropping anything... Of course, my vehicle has always been odd. OP, something doesn't seem right if you aren't happy with a 9515 on an AQ2200 as your first system. I was happy with a 3515 on a RF P200.2 lol Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.