watabeast Posted September 7, 2011 Report Posted September 7, 2011 So im putting 2 15 inch Re SXX in a aero ported box. Would it be overkill if i used 1 inch mdf, braced it and doubled up for 2 inches on where the woofer is mounted? Quote
zx10intn Posted September 7, 2011 Report Posted September 7, 2011 overkill is relative lol, i would just use 3/4 and double baffle with bracing if it were me, but hey, if you want the 1" go for it, just make sure you have a back brace handy, that shit is heavy! Quote 1969 Chevy Chevelle 20/22" staggered Bonspeed Huntingtons wrapped in Nitto INVO's Mechman 250amp cs144 alt w/AVBM Kinetik 1800 main battery/Kinetik 2400 in the trunk Pioneer AVH-3200dvd Headunit (2) sets of Hybrid Audio Technologies Imagine components up front (2) DD 3512's d4 coils Sundown sax100.4 component amp Sundown saz-3000d subwoofer amp 5ft^3 box tuned to 34hz MY BUILD
graham0599 Posted September 7, 2011 Report Posted September 7, 2011 Overkill is underrated. It won't hurt at all but isn't necessary. Quote My 350z build- http://www.stevemeadedesigns.com/board/topic/174424-2008-350z-build/page-2?hl=%2B350z+%2Bbuild#entry2605678
ALPINE408 Posted September 7, 2011 Report Posted September 7, 2011 there is no such thing as overkill in car audio just fyi Quote Have you ever had your woofers blown?
techforce Posted September 7, 2011 Report Posted September 7, 2011 I would use 3 layers of 1" birch, steel bracing and 3" steel rods every 8" inside cabinet along with a layer of concrete in between each layer and 1" thick of fiberglass inside and use case hardened steel aero port, plastic flexes.. If you can afford it, buy a couple concrete light poles and cut them down as bracing inside the box instead of the steel rods. Also, use titanium 3/4" bolts to mount the subs that way they don't break. Also... what about deadener?? I would use 16-20 layers of Alpha Damp on EVERYTHING in the vehicle and I would look into installing a stripper pole every 2 square feet to minimize flexing... That would be my ideal setup for what your doing... Quote
techforce Posted September 7, 2011 Report Posted September 7, 2011 To answer your question.... that might be a lil overkill.... Not really needed... but will not hurt anything... I would rather make it too tough than not tough enough!!! Quote
Superjay Posted September 7, 2011 Report Posted September 7, 2011 what is this "overkill" of which you speak? Quote Principal JTech Consulting - Leader in 12-Volt Training and Product PlanningIt's not about how much power you have, but how well you use it
watabeast Posted September 8, 2011 Author Report Posted September 8, 2011 Haha thanks guys, was just checking, this is my first enclosure build Quote
deepsilencer Posted September 8, 2011 Report Posted September 8, 2011 i dont believe in overkill lol Quote TEAM FLEX ISSUES,TEAM DC AUDIO 2000 Silverado Ext 1500 v.3 (Walled Silverado) 4 DC Power 270a Alts on A DC Power Quad Alt Bracket XS Power VCM,Stinger Volt Meters 4 AA Mayhem 18s 2 DC Audio 9.0ks Strapped 1 DC Audio 175.4 4 Selenium 6.5s & 4 Selenium 8s 4 Selenium Super Tweeter st350s 72 SQ Ft Of Stinger Roadkill Expert Alpine CDA 9887 XS Power d3400(Hood),6 XS Power d3100s(Bed) & much more..... 2011 Meca CA State Champion & State Record Holder In M5 Meca SPL:158.2 Meca P&P:137.4 DB Drag:159.1 USACI:161.2 BUILD LOG.....YOUTUBE CHANNEL.....FEEDBACK
watabeast Posted September 8, 2011 Author Report Posted September 8, 2011 Ok, so im still in the designing stages, but if i go with 1 inch mdf would bracing be necessary? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.