splcb7 Posted September 14, 2011 Report Posted September 14, 2011 Any advice on how to get rid of port noise? It starting to bug me....lol
Torres Posted September 14, 2011 Report Posted September 14, 2011 need info on the box/port specs in order to help. first thing that comes to mind is too thin/small of a port.
bassrace Posted September 14, 2011 Report Posted September 14, 2011 need info on the box/port specs in order to help. first thing that comes to mind is too thin/small of a port. x2. Or maybe the box is flexing, or glue seal broke? Have you checked to make sure the box doesnt have a panel slapping? 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
Torres Posted September 14, 2011 Report Posted September 14, 2011 also possible to have bad joints in the box and air could be leaking from those causing some noise
ChevyBoy95 Posted September 14, 2011 Report Posted September 14, 2011 or bad seal on the subwoofers basket/gasket to the baffle Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
TheBetterMethod Posted September 14, 2011 Report Posted September 14, 2011 I'd like to see the specs for the box and port. Square edges and undersized ports are the most common causes of port noise. 2005 Subaru Outback Wagon Pioneer 9400BH Fi Q 15, SAZ1500dV3 The first build>>> http://www.stevemead...-outback-build/ 140.9 @ 36hz Sealed on dash! REBUILT!!! 2 Fi Q 15s, 2 SAZ1500dv3 146.9 @ 39hz dBDRA certified
Recommended Posts
Archived
This topic is now archived and is closed to further replies.