SA-8 v.2 New Frame Tool !

[jagblazer01]

stop teasing jacob lol

[bassrace]

Need pics.lol let us see um.

[ChrisLun]

Jacob, as we all know.......

[727Designs]

You're killing us with this dick tease BS. Pics or gtfo!

[sundownz]

When we get 100+ Facebook likes I'll put it up

[727Designs]

Up to 38 now

[Infinite Reality]

76 and counting

[Maticus]

There's 100!

[KMS]

I hate waiting.

[sundownz]

Here she is... our new 100% Sundown Audio frame tooling... with our name made into it !

* Logo on the inside of the frame... you can see the pre-drills for the spider to be bolted in. Will be a dual spaced spider setup.

* Large bottom cut-out hole for a bit more flexibility for future designs + Sundown logo on the back side of the landing.

* Nice, clear logo cast in

* Inside logo close-up

* Frame is a BEAST... tons of clearances.

We have 2" from the surround land to spider land... and 1.2" rearward clearance.

Up from 1.75" / 1" on the "new style" SA-8 v.1 frame.

We are using some of the extra 0.25" of top clearance for the spaced spider setup (0.4" of it) -- the spiders will also be 10mm wider than what we use now on top of that... plus the extra 0.2" of rearward will prevent bottoming out the spider on the top plate.

Also -- no frame venting is present, you are not hallucinating... we will use a vent spacer like the SA-10/12/15 to proving spider plateau ventilation.