Jump to content

Numatik's Bagged 2004 Silverado


Recommended Posts

Posted

Looks cool to me!

I may hit you up to weld up some stuff for my mom. She lives in the hills in Vacaville and has to drive her garbage cans down the hill every week. Every other week, it's two, and then other weeks its one. But I was thinking something light, like aluminum if you can weld that, and it could be a hitch as well so it can slide into the hitch spot on the back of her van. Then rise up about 2' and have a little hanger to put the handles on. What do you think?

I thought aluminum so she could easily take it off the van when shes done.

Sorry to jack a little.

Thanks! I'll send you a pm, this thread is too off topic as it is, but I just had to post the snowmen I made

Thats Bad-ass bro, definitely makes a hell of a nice X-mas gift!

Thanks man! It was alot of work, it looks simple but it was just tedious. It was worth it tho, def got me off the hook this year :)

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

This truck is just sooooo sexy!! 99-06 nbs are my absolute favorite trucks.. Everytime I see this truck it gives me hope that mine will turn out somewhat as clean

Laying frame soon.. System has to wait

Posted

man u are fuckin champ... u workin with an thru the pain motivates me to do something... even tho im on leave for the holidays and have not a damn thing to do u motivate me..

Thanks man! I work my ass off whenever im physically able to. I love fabricating and I love bags, bitches, bodydrops and stereos :yahoo:

Im sure you can fine something to tinker on while your on leave, just think of something crazy and build it. Its VERY rewarding when you done, get on it brotha you'l find something!!

This truck is just sooooo sexy!! 99-06 nbs are my absolute favorite trucks.. Everytime I see this truck it gives me hope that mine will turn out somewhat as clean

Thanks brotha, I love them too. Im never gonna sell this truck, my son is 2 and this will probably be his truck in highschool. Im glad its inspiring to people, cause thats how I started minitrucks. Seeing a build, taking ideas and molding them into your own personal creations with all your own twists and changes. Build yours, makes mistakes, fix them, build it, change it, build it, change it thats how you learn. Iv made mistakes and thats how you learn, so I say go for it!!

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

This next post can also be seen in my other thread, I put it here to cause alot of different ppl that come to this build may have some other ideas then ppl posting in the other. post in either thread il be checking both. Please help!!!

http://www.stevemeadedesigns.com/board/topic/128937-alternator-squeak/

Hey guys, im sorry if this is in the wrong category, if it is could I have a mod move it to the correct place, thanks!

I have a 2004 Silverado show truck, it has a 4.3l v6, with A/C. It has a 300 amp boss alternator. Whenever the truck is cold, I start the truck and it starts squeaking. Sometimes when I pull out of the driveway it will squeak alllll the way down my street. I called an alt shop and gave him the symtoms, and he gave me something to try. He said start the truck when its cold, let it squeak for like 5 seconds, then shut it off, and run under the hood and very quickly just touch the alts pulley. It was burning hot, and he said thats a sign the belt is physically squeaking on the pulley, because if it was free spinning it wouldnt heat up that fast since the friction of the belt slipping would make the pulley that hot in no time.

I called boss alts, they were no help at all. he didnt have any way to fix it, he said find a local alt shop (which i did) and ask them to fix it. he said if they couldnt fix it to just send it back. he said he had never gotten a phone call with this problem and hes sold hellla alts for a long time.

Before these phone calls, I replaced the belt, tensioner, and idler pulley, and was advised to NOT use belt dressing.

What should I do next? i was recommended to try a different belt called a gatorback by good year, what do you guys think? Im going to post this in my project thread too so more ppl see this thread

Please somebody help!!

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

Its not a frozen pulley the alt still charges the batterys. its only start up issues. Occasionally now even if I park it after the squeaking stops it comes back on after I park for a while!! Iv never had a problem like this where iv replaced so much shit and didnt fix. I did the test the alt guy told me and he was certain the belt was slipping ont he pulley, thats how it generated so much heat in such little time. I think im gonna try a goodyear gator belt next. I dont kno tho, even if dude was wrong about the pulley, im wondering if ac, powersteering etc could be doing it too, but dude was certain its slipping. I dunno im hoping somebody on here will have something else to try

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

Its not a frozen pulley the alt still charges the batterys. its only start up issues. Occasionally now even if I park it after the squeaking stops it comes back on after I park for a while!! Iv never had a problem like this where iv replaced so much shit and didnt fix. I did the test the alt guy told me and he was certain the belt was slipping ont he pulley, thats how it generated so much heat in such little time. I think im gonna try a goodyear gator belt next. I dont kno tho, even if dude was wrong about the pulley, im wondering if ac, powersteering etc could be doing it too, but dude was certain its slipping. I dunno im hoping somebody on here will have something else to try

Just a thought:

Take off the belt and spin all the moving pulleys & tensioner, might be a bad accessory that giving out so look for any drag.

I had a similar problem with my truck but it was due to the exhaust shop removing an alternator bracket that was held by a header bolt which caused my alternator to wobble. But mine didn't squeak for long because the wobble broke a bolt outta the alternator bracket which caused my belt to completely come loose.

So you can also check to see if any of the components are loose, doesn't have to be the pulley in its self that's causing the problem.

Posted

Its not a frozen pulley the alt still charges the batterys. its only start up issues. Occasionally now even if I park it after the squeaking stops it comes back on after I park for a while!! Iv never had a problem like this where iv replaced so much shit and didnt fix. I did the test the alt guy told me and he was certain the belt was slipping ont he pulley, thats how it generated so much heat in such little time. I think im gonna try a goodyear gator belt next. I dont kno tho, even if dude was wrong about the pulley, im wondering if ac, powersteering etc could be doing it too, but dude was certain its slipping. I dunno im hoping somebody on here will have something else to try

Just a thought:

Take off the belt and spin all the moving pulleys & tensioner, might be a bad accessory that giving out so look for any drag.

I had a similar problem with my truck but it was due to the exhaust shop removing an alternator bracket that was held by a header bolt which caused my alternator to wobble. But mine didn't squeak for long because the wobble broke a bolt outta the alternator bracket which caused my belt to completely come loose.

So you can also check to see if any of the components are loose, doesn't have to be the pulley in its self that's causing the problem.

I did spin them all by hand and didnt hear anything. The tensioner is brand new, idler pulley and a new belt. The alt is bolted perfectly to the factory brackets. How else can I check the other accessories?

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...