for the life of my i cant come up with a box that i like

[Hitman813]

haah ok and do yall think 1inch burch with steel bracing in the boc will be good and solid

[BFF Larry]

What about figuring the cost and time as well

[Hitman813]

ehhh i couldnt care less what it cost me

[loudNlow87]

You said you wanted to tune pretty low, but I can't see building a wall for 25hz. So, here's 21 cubes @ 33Hz with 300" port area for two 18's.

I would add some bracing as well. but you get the idea.. Sketchup's fun as all hell.

[Hitman813]

whats that box before and after the port displacement

[loudNlow87]

whats that box before and after the port displacement

25 cubes before port and 21 after..

[Decaf]

I'm tuned to 32hz and can play anything I've made, I drop off at 25hz in car.

...but my power handling below tuning isn't great, so its a tradeoff. you can't be wanging below tuning for minutes on end and not expect warm dustcaps

[Purplehaze]

I'm tuned to 32hz and can play anything I've made, I drop off at 25hz in car.

...but my power handling below tuning isn't great, so its a tradeoff. you can't be wanging below tuning for minutes on end and not expect warm dustcaps

X 2

The box I am building now is tuned @33hz, and I'm afraid it may be a little bit too low.

It really depends on what brand of subs, not just what size.

Hope this helps

[ALPINE408]

y do u say it will kill my car or trany

that car is basically a ford..... ford CAR trannys fail like no other its not build for what you want to do new tranny and motor ill give you 2 years befor its all junk