Twostrokeking Posted November 17, 2011 Author Report Share Posted November 17, 2011 I <3 your truck man. Box is gonna look awesome. Thanks Dude!! And i hope! Does two shallow 12" p3's sound good? My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio Link to comment Share on other sites More sharing options...
DudeWith4x4 Posted November 17, 2011 Report Share Posted November 17, 2011 I <3 your truck man. Box is gonna look awesome. Thanks Dude!! And i hope! Does two shallow 12" p3's sound good? Hmm.. Haven't had alot of experience with Rockford stuff.. Had some P1's once that I was impressed with since they were their lowest line of subs.. I say go for it man. Are you planning on porting your box? -Ross Project Layla Truck: 99' F-150 Gathering things for my next build. SoloX18 build: http://www.stevemead..._1#entry1576460 RE T-line build: http://www.stevemead...-between-build/ Link to comment Share on other sites More sharing options...
Twostrokeking Posted November 17, 2011 Author Report Share Posted November 17, 2011 I <3 your truck man. Box is gonna look awesome. Thanks Dude!! And i hope! Does two shallow 12" p3's sound good? Hmm.. Haven't had alot of experience with Rockford stuff.. Had some P1's once that I was impressed with since they were their lowest line of subs.. I say go for it man. Are you planning on porting your box? nah, dont have the room for ported and i dont wanna raise the seat. I dont plan on dating midgets haha My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio Link to comment Share on other sites More sharing options...
Nine8SST Posted November 17, 2011 Report Share Posted November 17, 2011 Whats wrong with midgets? 1998 SS/T Ram Build Log - Kenwood KVT-514 and KNA-G510 Navigation - 2 DC Level 3 12" - Components??? - Sundown ??? - Sundown??? - Knu Konceptz - Second Skin Dampy Pro - XS D6500 Link to comment Share on other sites More sharing options...
BassMunky Posted November 17, 2011 Report Share Posted November 17, 2011 got video? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
Twostrokeking Posted November 18, 2011 Author Report Share Posted November 18, 2011 GLUED, SCREWED, AND CAULKED. (Silicone but caulked sounded cooler ) Test fitted it but it was to dark to take pics. It looks good and if it was even a 1/8" it probably wouldn't fit. It fits like a glove. (A tight glove) I used silicone to seal it after i glued it and screwed it. My dad said use caulk but silicone seemed more logical to my dumb ass teenage mind. Well Me being excited but it in the truck before the silicone was dry and i got it on my seat. ): i hope so bad it wont be noticeable in the day light. I'm quite bummed about that. Lesson learned. Listen to your dad. I gotta cut the top pieces since it will be doubled and woofers will be flush mounted. So the top and back piece still need to be cut but the top wont be installed for a while because the bottom still has to be glassed. Problem is, i owe my parents 140 for my deck, and the subs are 250 for them both and then i need resin and mat. money freaking blows.. never in a good way though. Let me hear what you think. Remember, i'm a 15 year old Special thanks to: The Better Method and Scooter99 My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio Link to comment Share on other sites More sharing options...
pimpnFosgates Posted November 18, 2011 Report Share Posted November 18, 2011 looks sick buddy i had one p3 shallow mount in a prted box a while back n the one was re god damn diculous.had loudest system in my high school cuz i listened to folks on here bout the box. everyone had prefabs n went with all the ooooo lala brands. i dug fosgate cuz ther cheap n were the frst brand i owned. i dig em n i think you will too. i still have a set of he2 punches and theyre the loudest ive owned, n so far ive only had em in a sealed box. im sellin em for 8s tho. skar vvx8s that is Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube Link to comment Share on other sites More sharing options...
310_cutty Posted November 18, 2011 Report Share Posted November 18, 2011 GLUED, SCREWED, AND CAULKED. (Silicone but caulked sounded cooler ) Test fitted it but it was to dark to take pics. It looks good and if it was even a 1/8" it probably wouldn't fit. It fits like a glove. (A tight glove) I used silicone to seal it after i glued it and screwed it. My dad said use caulk but silicone seemed more logical to my dumb ass teenage mind. Well Me being excited but it in the truck before the silicone was dry and i got it on my seat. ): i hope so bad it wont be noticeable in the day light. I'm quite bummed about that. Lesson learned. Listen to your dad. I gotta cut the top pieces since it will be doubled and woofers will be flush mounted. So the top and back piece still need to be cut but the top wont be installed for a while because the bottom still has to be glassed. Problem is, i owe my parents 140 for my deck, and the subs are 250 for them both and then i need resin and mat. money freaking blows.. never in a good way though. Let me hear what you think. Remember, i'm a 15 year old Special thanks to: The Better Method and Scooter99 How tall is the front piece? It would be nice if you could fit maybe two 8's and have room for a aero port! Link to comment Share on other sites More sharing options...
Twostrokeking Posted November 18, 2011 Author Report Share Posted November 18, 2011 GLUED, SCREWED, AND CAULKED. (Silicone but caulked sounded cooler ) Test fitted it but it was to dark to take pics. It looks good and if it was even a 1/8" it probably wouldn't fit. It fits like a glove. (A tight glove) I used silicone to seal it after i glued it and screwed it. My dad said use caulk but silicone seemed more logical to my dumb ass teenage mind. Well Me being excited but it in the truck before the silicone was dry and i got it on my seat. ): i hope so bad it wont be noticeable in the day light. I'm quite bummed about that. Lesson learned. Listen to your dad. I gotta cut the top pieces since it will be doubled and woofers will be flush mounted. So the top and back piece still need to be cut but the top wont be installed for a while because the bottom still has to be glassed. Problem is, i owe my parents 140 for my deck, and the subs are 250 for them both and then i need resin and mat. money freaking blows.. never in a good way though. Let me hear what you think. Remember, i'm a 15 year old Special thanks to: The Better Method and Scooter99 How tall is the front piece? It would be nice if you could fit maybe two 8's and have room for a aero port! The front is 9 1/2" I think. I decided im gonna do 2 12'' p3 shallows sealed for a year or so and when I learn more I'll do ported. My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio Link to comment Share on other sites More sharing options...
Twostrokeking Posted November 18, 2011 Author Report Share Posted November 18, 2011 looks sick buddy i had one p3 shallow mount in a prted box a while back n the one was re god damn diculous.had loudest system in my high school cuz i listened to folks on here bout the box. everyone had prefabs n went with all the ooooo lala brands. i dug fosgate cuz ther cheap n were the frst brand i owned. i dig em n i think you will too. i still have a set of he2 punches and theyre the loudest ive owned, n so far ive only had em in a sealed box. im sellin em for 8s tho. skar vvx8s that is Thanks man! U think they will slam then? And I could maybe be heard from a distance? My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.