Reg_Cab_Slammer Posted November 23, 2011 Report Share Posted November 23, 2011 OK so im planning on putting a saz1200 on two sa 8's, if there is no devider in the box, how do i wire the subs to a 1ohm if its a mono amp but has 2 speaker outputs? PLEASE HELP! Thanks, Colby Quote 2001 Dodge Ram Kenwood Deck Pioneer speakers Link to comment Share on other sites More sharing options...
mattc3366 Posted November 23, 2011 Report Share Posted November 23, 2011 Is the box ported or sealed? If sealed I think there should be a divider. And if there dual 4s you do one set going to the speaker and do positive to positive negative to negative and jump the positive to the other positive and negative to the other negative. And repeat for the 2nd sub. Quote subwoofers - two eclipse 88120s box - 3.4 cubes tuned to 32 hz amps - aq1200 and pheonix gold zx450 New build : 2 obsidian audio 15s same amp 6.1 cubic foot box tuned to 32 hz in a civic hatch Link to comment Share on other sites More sharing options...
n8ball2013 Posted November 23, 2011 Report Share Posted November 23, 2011 its not nearly as hard as you are making it. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Bigsix Posted November 23, 2011 Report Share Posted November 23, 2011 google is your friend. 8bazillion results when searching for how to wire a ________ woofer... Quote 1999 Lincoln Town Car-(build underway) - (2) SA15s, 4th order, DAT 2500.1, O2 mids n highs, 250a alt, HC 2400, Big 3.... 1994 Pontiac T/A for speeding tickets.- - Currently on jack stands, wanting to be a real race car "Your local forecast, all the ladies in the metro area should expect to see 8 inches tonight" - The Todd Decaf, on 01 November 2011 - 02:38 PM, said: i provide the ammo for destruction, the trigger finger is connected to the volume knob tho URBAN GORILLA AUDIO Link to comment Share on other sites More sharing options...
Lbox88 Posted November 23, 2011 Report Share Posted November 23, 2011 Like this Quote UBL | Build Log Link to comment Share on other sites More sharing options...
Purplehaze Posted November 23, 2011 Report Share Posted November 23, 2011 OK so im planning on putting a saz1200 on two sa 8's, if there is no devider in the box, how do i wire the subs to a 1ohm if its a mono amp but has 2 speaker outputs? PLEASE HELP! Thanks, Colby Okay, to start with, it's a mono amp, therefor you would want a single chamber, single port. And the two speaker outputs are so you can run more than one positive and negative, if you need to. They don't all have to be used. The 2 positives are the same, and the negatives are the same. To get the wiring your looking for, wire the positives together on each sub, then the negatives on each sub. Then your positive from the amp goes to one of the positives on each sub, and the same with the negative. Negative from the amp to one of the negatives on each sub. And then you should be wired to 1 ohm. Hope this helps. Quote Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
bassrace Posted November 23, 2011 Report Share Posted November 23, 2011 What ohm subs? Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry Link to comment Share on other sites More sharing options...
Reg_Cab_Slammer Posted November 23, 2011 Author Report Share Posted November 23, 2011 (edited) thanks guys see i though i could wire it like that, sorry im such a so you guys think this setup sounds good though and i was gonna do dual 4s to get 1 ohm right? and thanks guys for helping me continue to learn haha Edited November 23, 2011 by Reg_Cab_Slammer Quote 2001 Dodge Ram Kenwood Deck Pioneer speakers Link to comment Share on other sites More sharing options...
justin74728 Posted November 23, 2011 Report Share Posted November 23, 2011 OK so im planning on putting a saz1200 on two sa 8's, if there is no devider in the box, how do i wire the subs to a 1ohm if its a mono amp but has 2 speaker outputs? PLEASE HELP! Thanks, Colby Quote kenwood excelon -- head unit kicker amps-- 1x 1000.1 1x 750.1 kicker subs-- 2x shallow mount subs 2x cvr 12's factory mids and highs (a major upgrade would be nice but, limited space and funds) Link to comment Share on other sites More sharing options...
justin74728 Posted November 23, 2011 Report Share Posted November 23, 2011 My link this website might help ya Quote kenwood excelon -- head unit kicker amps-- 1x 1000.1 1x 750.1 kicker subs-- 2x shallow mount subs 2x cvr 12's factory mids and highs (a major upgrade would be nice but, limited space and funds) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.