Angel187 Posted December 5, 2011 Report Share Posted December 5, 2011 I have a soundigital 16k, with enough electrical to back it, I will be running one dc lvl5 18 in a ss n/w box in a vw golf. Since I have never played with the lvl5 before what would be recommended for box size and port with the power I have. Subs are dual 1ohm, .5 burp Quote -Angel Link to comment Share on other sites More sharing options...
CortezDTV Posted December 6, 2011 Report Share Posted December 6, 2011 at the 16k at .5 I played with a lvl 5 on an 8k, they get super loud, I would watch ur clippin to that poor sub... Might want to add extra spiders too But 5 cubic feet, 16 to 19 port area Quote SCSB Santa Cruz Speaker Box Build logs: Daily Driver Lemon Marquis 2 american bass 750.1s 350.4 on 14 focal 6.5s sq 945 on 4 hertz tweeters Mystery subs http://www.stevemead...__fromsearch__1 The Mustang 'dubbed' Shirley the project from bullet holes to badass http://www.stevemead...cond-skin-time/ Link to comment Share on other sites More sharing options...
CortezDTV Posted December 6, 2011 Report Share Posted December 6, 2011 (edited) Double post..... Edited December 6, 2011 by CortezDTV Quote SCSB Santa Cruz Speaker Box Build logs: Daily Driver Lemon Marquis 2 american bass 750.1s 350.4 on 14 focal 6.5s sq 945 on 4 hertz tweeters Mystery subs http://www.stevemead...__fromsearch__1 The Mustang 'dubbed' Shirley the project from bullet holes to badass http://www.stevemead...cond-skin-time/ Link to comment Share on other sites More sharing options...
fmedina Posted December 6, 2011 Report Share Posted December 6, 2011 dam ya 16k for one lvl5? thats quite a bit. shoot cortez's two 15's lvl5 on a single 5k is fuckin loud. one lvl5 might not hold long on 16k at .5 Quote Link to comment Share on other sites More sharing options...
CJ18 Posted December 6, 2011 Report Share Posted December 6, 2011 Very small box and I don think the SD16k likes being run much lower than .7 Quote Link to comment Share on other sites More sharing options...
fecupe2001 Posted December 6, 2011 Report Share Posted December 6, 2011 If it´s a burp machine (wich he said it is) it could take it Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
fmedina Posted December 6, 2011 Report Share Posted December 6, 2011 oh burp maybe ya. but like cj said. youd want a pretty small box. Quote Link to comment Share on other sites More sharing options...
Angel187 Posted December 6, 2011 Author Report Share Posted December 6, 2011 oh burp maybe ya. but like cj said. youd want a pretty small box. Im thining an L box,5 cu/ft after displacement with a 10" port 34 inches long. This was after a conservation with rusty as per needed sq/ft. This is not a sq or ground pounder, nothing but numbers here. Also thinking maybe the traditional n/w box, sq port and sub forward to the b piller. Oppions as i am undecided. Quote -Angel Link to comment Share on other sites More sharing options...
Whothennow Posted December 6, 2011 Report Share Posted December 6, 2011 Gutted from Bpillar back and window line down. Box in the back sear area as bog as you can get. Biggest port you can fit then shrink it till it peaks. Done. [email protected] is fine for burps. They want to see 1-1.5 after rise. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.