VVX-12 stopped working

[Blackard11]

its a D2 with another set of leads on the other side as well. Both read the same..Nothing at all

[kr15]

it might help if your dmm wasnt set for AC voltage

or is it set on 2000 for OHM reading? put it on 200

you should still get SOME type of reading even if its a retarded blown reading like 38ohm..if you truly get no reading, the tinsel is likely breached somewhere

Edited January 9, 2012 by kr15

[Emoxihax]

tehehe

[fox_racin4]

it might help if your dmm wasnt set for AC voltage

maybe its set in the ohm area and you cant see it.....

if it was in the AC voltage it probly would read 0

[Blackard11]

i used the same voltage for my other subs an they read just fine..

[Blackard11]

the tinsels are off the coils im pretty sure

[Blackard11]

it might help if your dmm wasnt set for AC voltage

or is it set on 2000 for OHM reading? put it on 200

you should still get SOME type of reading even if its a retarded blown reading like 38ohm..if you truly get no reading, the tinsel is likely breached somewhere

it was set at 2000 OHM reading for that pic

[kr15]

set for 200, more accurate reading..but im guessing your tinsels are smoked somewhere

[BFF Larry]

d2 sub reading 1 on the dmm...

[99fullsizechevy]

d2 sub reading 1 on the dmm...

Thats what I was thinking....