basshead8569 Posted January 9, 2012 Report Posted January 9, 2012 so i have the part of my trunkthat im going to make a mold of, so i can turn it into a sub box. what i need to know is ,is the masking tape enough so the resin doesnt stick to my trunk or is there something i have to lay down to keep it from sticking to my trunk. I fiber glassed a piece to fit under the back window. No speakers there just a piece of carpet. I took tin and molded it to the carpet piece that was there and that worked. I cannot remember the wax stuff I was told to use to help get the tin off when dried. Current system (still building) 2 kicker 12" dcvr in factory kicker ported box, Rockford Fosgate 1200.1 Amp, Kenwood ddx-470 ddin radio, Rockford Fosgate 0 Gauge wiring, Rockford Fosgate punch 6X8 2 way speakers.
pimpnFosgates Posted January 9, 2012 Author Report Posted January 9, 2012 hopefully this comes out like i hope Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube
Audio-Concepts Posted January 9, 2012 Report Posted January 9, 2012 ok.seems simple enough. now wats trim glue?spray adhesive? Yeah and cheap spray adhesive, it will help with laying the matting on vertical portions, so you can just lay the resin, instead of having to hold the matting and lay resin, helps keep it flat and easy to work with! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring
pimpnFosgates Posted January 9, 2012 Author Report Posted January 9, 2012 coool. thanks guys. yall are super helpful Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube
Audio-Concepts Posted January 9, 2012 Report Posted January 9, 2012 No problem, keep us posted, hope it turns out like you imagine! Good luck! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring
MrSkippyJ Posted January 9, 2012 Report Posted January 9, 2012 I didn't have to do anything to help get the tin foil off, since everything I glassed isn't seen. Didin't even think about telling him that. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
ChrisLun Posted January 10, 2012 Report Posted January 10, 2012 For something like that you can look into 1/4-1/2 inch chop stand......I use it alot for subwoofer enclosures and it lays faster than mat, and alot stronger.....Aso look int using a 24 oz mat its thicker and takes less applications 2006 Dodge Charger (2) Kinetic 3800 (1) DC Power 270XP (4) T1-12D4 (1) T2500BDCP (2) T400.4 7.5 cubic ft. (2) 6 in ports thru the rear deck (2) T165.2 (2) T169.3
Recommended Posts