SONCIO Posted January 10, 2012 Report Share Posted January 10, 2012 Any one know where I can get some wheel adapters.I need to make this convertion 5x127 patter to 5x110 the rims are on a 2004 malibu ls and want to fit them on a 1985 S-10 Blazer.Any suggetions will be appreciated. Quote Link to comment Share on other sites More sharing options...
Skullz Posted January 10, 2012 Report Share Posted January 10, 2012 You'll need new axles and front hubs with the new bolt pattern cause there are no adapters for converting them, either the rims have special bolt patterns for multiple sizes or they're a one size only fitment. Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
Maticus Posted January 10, 2012 Report Share Posted January 10, 2012 (edited) You can look here: http://www.jcwhitney...c3842j1s17.jcwx Maybe here: http://adaptitusa.com/ Edited January 10, 2012 by Maticus Quote Link to comment Share on other sites More sharing options...
n8ball2013 Posted January 10, 2012 Report Share Posted January 10, 2012 why on earth would you want the stock malibu rims anyways. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
BeatBox Posted January 10, 2012 Report Share Posted January 10, 2012 id try a local shop if u can find one ebay google it up- here is a site i found http://www.ezaccessory.com/Billet_Wheel_Adapters_s/25.htm they should sit with in the fenders and not mexi flush since its going from a malibu to a blazer when YOU DO find the adapters, make sure the hubs are clean of corrosion or rust, then put loc tight on the studs, then torque them to specs i run dome spacer/adapters on the rear of my jimmy and even with the 24s ive never had a problem, found mine locally GL Quote Link to comment Share on other sites More sharing options...
SONCIO Posted January 11, 2012 Author Report Share Posted January 11, 2012 why on earth would you want the stock malibu rims anyways. there not stock malibu rims there 20'' rims.But now I'm doing a build on a blazer and want to see if I can fit the rims. Quote Link to comment Share on other sites More sharing options...
SONCIO Posted January 11, 2012 Author Report Share Posted January 11, 2012 id try a local shop if u can find one ebay google it up- here is a site i found http://www.ezaccessory.com/Billet_Wheel_Adapters_s/25.htm they should sit with in the fenders and not mexi flush since its going from a malibu to a blazer when YOU DO find the adapters, make sure the hubs are clean of corrosion or rust, then put loc tight on the studs, then torque them to specs i run dome spacer/adapters on the rear of my jimmy and even with the 24s ive never had a problem, found mine locally GL thanks I'll check it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.