JZeFF Posted January 12, 2012 Report Share Posted January 12, 2012 I was removing my RCA cables from my DC 175.4. When i went to plug them back in i noticed one of the female metal part from the amp was stuck inside of the male part of the rca cable... I was able to just push it back into the amp when i found out how it lined up, but im nervous about trying to pull that metal piece out... Its stuck in there pretty good and last thing i want is to bend it. These are the RCA cables i have: pretty normal i would think http://www.knukonceptz.com/productDetail.cfm?prodID=KARSS4.6M If i manage to get the metal part out, how can i get it to stay where it belongs, on the amplifier? Quote Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around Link to comment Share on other sites More sharing options...
Soapbox Posted January 12, 2012 Report Share Posted January 12, 2012 Never had that problem on my dc amp but I did on 2 sundown amps and it was with knu rca's both times! Quote TEAM FLEX ISSUES, TEAM DC AUDIO 2010 California State Finals Champion MECA AS2 2011 California State Champion Meca S2 2011 California State Record holder Meca S2 2012 Meca Mod 4 class 152.5 and rising Link to comment Share on other sites More sharing options...
JZeFF Posted January 12, 2012 Author Report Share Posted January 12, 2012 Never had that problem on my dc amp but I did on 2 sundown amps and it was with knu rca's both times! How did you fix it? Quote Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around Link to comment Share on other sites More sharing options...
JZeFF Posted January 12, 2012 Author Report Share Posted January 12, 2012 (edited) edit, wrong thread.. my bad Edited January 12, 2012 by JZeFF Quote Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around Link to comment Share on other sites More sharing options...
WCA Rusty Posted January 12, 2012 Report Share Posted January 12, 2012 (edited) I have never seen that with a DC amp but i have seen rcas that grab the outer section of the rca input and fit so tight it don't let go. Edited January 12, 2012 by WCA Rusty Quote DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors. Link to comment Share on other sites More sharing options...
redlineaudio Posted January 12, 2012 Report Share Posted January 12, 2012 we used to run into this all the time -- specifically with Memphis amps and RCA's that came in Xstatic amp kits Quote '94 Ford Ranger Ext. Cab (3) DC XL 15's, check that (3) 18's this year! (2) DC 5k's (6) XS Power D1600's 158.9.......so far...... Montana DC Dealer/State Rep. Link to comment Share on other sites More sharing options...
14dbass Posted January 12, 2012 Report Share Posted January 12, 2012 I have never had this problem... Quote Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
ALPINE408 Posted January 12, 2012 Report Share Posted January 12, 2012 monster cable rca's are notorious for doing that take some needle nose pliyers and open up the rca a lil. will do wonders Quote Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
n8ball2013 Posted January 12, 2012 Report Share Posted January 12, 2012 its more an rca problem than an amp Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
JZeFF Posted January 12, 2012 Author Report Share Posted January 12, 2012 okay, good to know. I wasnt trying to bash, just trying to fix it, haha. So, how can i fix it? Quote Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.