Relyks Posted January 25, 2012 Report Share Posted January 25, 2012 - how much air space? trunk can be like 17 h 38 wide 24 d. -mainly decaf music on these subs what do you think subs should be ported at?( not to low dont want the higher notes to sound like burps ) and it will be a slot port. -should the subs have port in between the subs? or all the way to the right or left? ( so that they share or dont share air space? ) -its going to be wired to 1 ohm so 600 rms a piece daily 1200 peak. big 3 and 1/0 knu oxygen free wire will be used. ( just remember its a trunk build , the back seat is used daily and he listens to decafs it AQ subs and loudest this trunk sound is sub and port back ) no sealing the subs/box from trunk will not be considered place your opinions and advice i need it (: --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
Relyks Posted January 26, 2012 Author Report Share Posted January 26, 2012 bump --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
Relyks Posted January 26, 2012 Author Report Share Posted January 26, 2012 bump --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
bassrace Posted January 26, 2012 Report Share Posted January 26, 2012 SD2.5's? 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 26, 2012 Report Share Posted January 26, 2012 you could get it to fit, with a few inches to spare. 16hx35wx18.5d port being 14.5x4.25x20 should be somewhere around 4.1 net air space before bracing, double the baffle. tuning should be good around 37-38. not to low not to high. this is all just estimates of course though t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Relyks Posted January 26, 2012 Author Report Share Posted January 26, 2012 SD2.5's? yes SD 2.5's AQ subs 12" on 600 rms a piece. wired at 1 ohm you could get it to fit, with a few inches to spare. 16hx35wx18.5d port being 14.5x4.25x20 should be somewhere around 4.1 net air space before bracing, double the baffle. tuning should be good around 37-38. not to low not to high. this is all just estimates of course though keep in mind the AudioQue Subs like alot of air space like half a cu more then normal it seems ( for example 10" subs 1.5 cu.ft audioque sub 10 " 2.00cu.ft ) and yes i have tested this theory with my 2.5 10" sub on 870 rms. so design with that in mind. also should they share air space? or have there own air space for each sub? ( i found that this car likes subs fired to back port to back ) where i have found with my old corolla it liked sub up port back --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
Robert8252 Posted January 26, 2012 Report Share Posted January 26, 2012 4 cubes net. 56 inches of port. Tune to 33-34. AQ subs will play high no matter the tuning. Port drivers side. Facing rear. 2013 F150 Crew Cab Old Build Log Feedback 2013 F150 Equipment - Some Awesome Stereo Sound Making Stuff Link to comment Share on other sites More sharing options...
Relyks Posted January 26, 2012 Author Report Share Posted January 26, 2012 4 cubes net. 56 inches of port. Tune to 33-34. AQ subs will play high no matter the tuning. Port drivers side. Facing rear. out of curiosity and i wanna learn why so why port it to back on drivers side ( regardless it will be ported to the back ) didnt think it mattered what side since it was in the trunk. 4cu.ft sound a little small on air space AQ love a lot of air. like i said above about my 10 and i tested it and heard it from tons of others. --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
Robert8252 Posted January 26, 2012 Report Share Posted January 26, 2012 Just seemed to work good for them. Just because a sub likes say 2.3 cubes by itself doesn't mean two in the same box needs 4.6. AQ subs have just been weird to work with personally 2013 F150 Crew Cab Old Build Log Feedback 2013 F150 Equipment - Some Awesome Stereo Sound Making Stuff Link to comment Share on other sites More sharing options...
Relyks Posted January 26, 2012 Author Report Share Posted January 26, 2012 Well AQ subs have been my first subs and i know i went from 1.5cu.ft to 2.00cu.ft no port hz change or type of port or port placement and i got a huge improvement out of it. --> My Toyota Build Link / AudioQue Build . <-- Latest Update 1/16/12 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.