help with my highs set up

[GORILLAslap]

im going to have a saz-50.4 , with 4 6x9s 2 3.5s 4 tweets

http://www.audiosavings.com/products/6x9-Car-Speakers/2-Pairs-Kicker-11DS693-6x9-3-Way-Car-Audio-Speakers-Totaling-560-Watts-DS693/%282%29+11DS693.aspx

http://www.audiosavings.com/products/3.5-and-3-Car-Speakers/KICKER-KS35-3.5-2-WAY-KS-SERIES-2-WAY-SPEAKERS-11KS35/11KS35.aspx

http://www.audiosavings.com/products/Car-Speakers/2-PAIRS-OF-NEW-RE-AUDIO-TW-1-SILK-DOME-1-CAR-TWEETERS/%282%29+TW1.aspx

my question is all this equipment what ohm and type ( 2way 3wayetc..) that im going to need

and is this amp going to be enough to get my moneys worth out of these speakers

[MrSkippyJ]

not a very ideal amp set up (4 channel) for that array of speakers.

[GORILLAslap]

suggestions please sir

[Kdub26]

thats a lot of stuff running off of one amp. the most i would do is the 6x9's off of the amp. i wouldnt see running 2-ways, 3-ways, and tweets off of the same amp. just sounds ghetto to me

[MrSkippyJ]

either less speakers or more amplifier channels.

[GORILLAslap]

would it be a good idea to just wire my tweets to my HU?

and just do away with the 3.5s

[Kdub26]

would it be a good idea to just wire my tweets to my HU?

and just do away with the 3.5s

i would do the 3.5's to the HU. if you do the tweets to the HU, youre gonna have bass trying to go thru them, and bass + tweets = not a good ending.

[MrSkippyJ]

why not just the 6x9s? what purpose is there with having 8 tweets?

[Kdub26]

why not just the 6x9s? what purpose is there with having 8 tweets?

i agree. dont do a tweet overkill if you dont have the equipment to do it. youll burn up stuff faster than you can spell your name. you'll have 6 tweets with your 6x9's and 3.5's. i had two 6.5 2-ways, and four 5.25 2-ways in my car, all of of the HU, and they sounded good. i would do the 3.5's to the HU, and the 6x9's to the amp, and set aside the 4 tweets for later use when you get more equipment to handle it

[Skullz]

Way too much going on with too little power to run them with.

Sometimes less is more, i would use a really good set of comps up front with around 125w x 2 or 150w x 2 to power them with.

With so many speakers and different sizes you can run into cancellation issues or overlap in certain areas where you can't correct it with eq's or any other means.