Joe X Posted February 26, 2012 Report Posted February 26, 2012 Its actually still 1.8 gross and 45hz atleast thats what the torres calculator says. The gross volume is not relevant for alignment but net volume (Vb) , anyhow is made by now so finish it and see if you like it.
HunterJohnson Posted February 26, 2012 Author Report Posted February 26, 2012 Yeah I changed my post. I've always had boxes at 32-35 hz so it'll be fun to try something higher Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
HunterJohnson Posted February 26, 2012 Author Report Posted February 26, 2012 Okay figured out what I'm going to do. I only have the bottom back and sides glued so I'm going to just screw it together and listen to it. If I like it i'll run with it, if not I'll adjust it back to the 1" port and get my 33.37 hz Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
HunterJohnson Posted February 27, 2012 Author Report Posted February 27, 2012 Well I finished 90% of my box tonight I listened to it at 42hz and didnt like it so back to a 1" port and 33.74hz After school tomorrow I'll get some terminals and figure out what I want to wrap it with and what amp I'll be upgrading to Heres the last picture before I closed it up Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
412 CVX Posted February 27, 2012 Report Posted February 27, 2012 that port is TINY Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
HunterJohnson Posted February 27, 2012 Author Report Posted February 27, 2012 that port is TINY Thats what I said too here the box completed anyone have an idea for terminals besides a terminal plate. I might just go with bolts Heres the finished product ready to get wrapped in something or idk something creative. Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
Joe X Posted February 27, 2012 Report Posted February 27, 2012 Don't worry it's Alpine design, it should work. But I liked better what I left you, You can carpet the box.
HunterJohnson Posted February 27, 2012 Author Report Posted February 27, 2012 Thanks for the help Joe! just didnt fit in my car that nice because of the battery amps behind it. it is still a backwards firing sub in a 33hz box! Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
412 CVX Posted February 27, 2012 Report Posted February 27, 2012 There's no way that's enough port area. no way in hell. Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
carshateme Posted February 27, 2012 Report Posted February 27, 2012 Yeah, I agree with CVX on this one. that port is WAY too small. Last time I checked the port recommendations on Alpine subwoofers were 2.75. New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center]
Recommended Posts
Archived
This topic is now archived and is closed to further replies.