pwdrblucivic Posted March 2, 2012 Report Share Posted March 2, 2012 I have used my new DD-1 on several amps since its arrival Saturday but I have a question....The distortion light NEVER came on with the last amp I tried to setup with it.. I done the head unit test first and it distorted at 25 so we set the deck to 24 and started adjusting amp.....I was able to turn the bass boost and gain all the way up....The distortion light never came on.....I tried it several times with same result.....I even took the DD-1 back over to my demo car and tested it again and the light worked like it should......Could it be possible for an amp to go FULL TILT without distortion? Quote Link to comment Share on other sites More sharing options...
MIKE-2U Posted March 2, 2012 Report Share Posted March 2, 2012 what track did you use. happened to me, turns out i was using -15 db track Quote 2006 Jeep Grand Cherokee LaredoPioneer AVH- 3200DVD2/0 Flex-A-Prene Welding Cable (2) Fully Loaded Fi Sp4's dual 1-------> My YouTube Channel <------- Needs more power those woofers will laugh at that turd Link to comment Share on other sites More sharing options...
teardrop Posted March 2, 2012 Report Share Posted March 2, 2012 if so whats the make and model and where the feqs set right? Quote Link to comment Share on other sites More sharing options...
Miguels Posted March 2, 2012 Report Share Posted March 2, 2012 make sure the ground was on there really good, mine was doing that and had to tighten the ground good(talking about the dd-1 prongs) Quote my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
MrSkippyJ Posted March 2, 2012 Report Share Posted March 2, 2012 something wasn't working right. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
pwdrblucivic Posted March 2, 2012 Author Report Share Posted March 2, 2012 Ok.....thanks guys........maybe it was a grounding issue but like I said it was hooked up to the amp when we done the test on the deck and the light came on right about 25......I will have him bring car by and try it again......I know the DD-1 is good cause it works fine in the demo car........I used track #1 to setup deck and track #7 to setup amp which is the one the manual says use for a louder system...This is the exact same way I set up my amps....I'll just have to try it on his again next time he is around....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.