Need a box for 2 8" skar vvx's

[SnowDrifter]

I'll post for him.

The amp is a Jensen 5500 5 channel and will have 250 watts between the pair / 125 watts each

[412 CVX]

try this

outer dims

11 tall, 35 wide, 16 deep

slot port w/ 3 common walls

9.5 high, 3 wide, 26 deep

this accounts for .05 cu ft for bracing

gives you 14.5 sq inches of port per cube

i know you wanted aeros, but this will be a little easier to make

[__d_a_v_i_d__]

125 before Impedance rise, on 2 400 watt 8s, I'll consider a t-line for them with that power .

[412 CVX]

well shit... gonna have to make the box a little bigger... or step your amp game up a little

with that amp go with this

outer dims

13 tall, 37 wide, 16 deep

slot port w/ 3 common walls

11.5 high, 3.25 wide, 24 deep (20" physical port length)

gives you 15.5 per cube with .05 for bracing

35 hz tuning

[412 CVX]

125 before Impedance rise, on 2 400 watt 8s, I'll consider a t-line for them with that power .

or this ^^

i could do a t-line for you if you'd like

[Joe X]

Here are the specs for the Skar VVX-8:

http://skaraudio.com/index.php/products/vvx-8/item/vvx-8-subwoofer.html

Hard to believe but their net volume range for ported is 1-1.4 cubic feet per sub. So here is a suggestion within your dims:

Enclosure Specifications:

Fb = 36.12 Hz

Vb = 2 ft^3

External Height = 13 in

External Width = 29 in

External Depth = 16 in

Port Width = 2 1/4 in

Cut List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

Front = 26 x 11 1/2

Back = 29 x 11 1/2

Left & Right Sides:

Side 1 = 14 1/2 x 11 1/2

Side 2 = 15 1/4 x 11 1/2

Top & Bottom = 29 x 16

L Port Internal Assembly Parts:

Front to Back = 12 1/4 x 11 1/2

Extension = 5 7/16 x 11 1/2

[irpirate]

125 before Impedance rise, on 2 400 watt 8s, I'll consider a t-line for them with that power .

Just did a t-line for 1 8 using dimensions pretty close to what the op has. won't fit w/o being tuned retardely high.