The Start of my AQ Box

[KenC210]

You should put port in middle from top to bottom, if you do that change port walls to 2

As cvx mentioned, bracing tends to be under .2cuft unless you have large 45s

try to get 8cuft+, 100sqin will be plenty if that helps

yeah i will look at doing that...

[KenC210]

i tried that and for some reason i got a less net volume

[Decaf]

well you have an extra .8cuft when entering the correct bracing (measure and find exact volume) which should be enough to account for the extra port wall since you use 2... i'm just suggesting even loading instead of port on one side.

this is sub up port back

Edited March 8, 2012 by Decaf

[KenC210]

I would have to keep sub and port on same side I dont have enough breathing room if port ifs back

[Sanitarium]

Yo dog, that box is inappropriate for public viewing.. it's topless.

HEY YOOOO

[KenC210]

Guess it needs to be in 18+

I will mess around with the torres when I get home

[412 CVX]

Yo dog, that box is inappropriate for public viewing.. it's topless.

HEY YOOOO

lol you drunk?

[KenC210]

alright so i calculated my bracing and i actually got .14 in which i will need to change the port length to 20 to get 35hz. I also seem to get small amount of more port area with 2 common walls so i will go ahead and do the port down center

Edited March 8, 2012 by KenC210

[KenC210]

Hows this or should i try and keep the port area per foot around 14

[Sanitarium]

Hows this or should i try and keep the port area per foot around 14

That's fine if you meant it as center ported (2 common port walls instead of 3 like a side walled slot)