Jump to content

Jeep Wrangler (JK) Subwoofer Tutorial


Recommended Posts

Edit: Found this helpful link - http://www.jk-forum.com/showthread.php?115758-Write-Ups-Aftermarket-Sub-Sub-Amp-Remote-Turn-on-Wire-LOC-(line-output-convertor)

Vehicle is a 2010 jeep wrangler with GPS, but base model speakers.

I have the stock head unit pulled out and have been checking the wires that go into it with a DMM to try and find the turn on wire.

But I have only found 1 wire that is constantly on (power) and 2 more that always read 2.1vdc regardless of ignition position.

Ideas?

Link to comment
Share on other sites

could look up the harness for your car, for an aftermarket HU, and see if you can get the pinout for it.

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Link to comment
Share on other sites

I have a simular issue with my trailblazer , The only cure for me was to run a seperate acc wire from fuse box, There are some very nice fuse plug adapters that plug right in to an exsisting fuse slot for less than 5 bucks, a little bit of wire and heat shrink did the job. hope this helps

25f7dyd.jpg

2007 trailblazer lthead unit- pioneer p4300dvd

crescendo ft-1 supertweeters

pioneer m650 pros

audiocontrol 2xs crossover

Rockford fosgate p200-2 highsrockford fosgate p400-2 mids1- fi btl 18amps- saz 3500battery- evermax in front, 2 9a31 dekas in rearwires all knuconceptz 1/0 and rcas

Link to comment
Share on other sites

Now I took off the covers and have access to the ignition and all it's wires.

Any ideas on which color wire coming out of it to use? Google has been lacking information on this / my search terms aren't good enough

Link to comment
Share on other sites

Got it all figured out. Found this link that was extremely helpful. I'll also edit the title of the thread so anyone searching can find it later.

:)

http://www.jk-forum.com/showthread.php?115758-Write-Ups-Aftermarket-Sub-Sub-Amp-Remote-Turn-on-Wire-LOC-(line-output-convertor)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1227 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...