Jeffl Posted April 16, 2012 Report Share Posted April 16, 2012 Making a box tomorrow and I have designs for one already but in the design I have it shows the sub about 2 inches more to the left of the box due to the 2' port on the right side, if I'm off by let's say .5' -1' is it going to sound bad? Or does it not make a difference at all? Link to comment Share on other sites More sharing options...
209er Posted April 17, 2012 Report Share Posted April 17, 2012 You should be fine. No worrys there. It would be a diffrent situation if your port was off. <p>Pioneer AVIC 6000 NEX, JBL 660c Components - FI SP415- Arc audio xdi2000.1- Xs Power- 0 gauge, Big 3 Upgrade Dc Power xp270 Link to comment Share on other sites More sharing options...
Socky Posted April 17, 2012 Report Share Posted April 17, 2012 You are fine for what you are doing. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
john253a Posted April 17, 2012 Report Share Posted April 17, 2012 for street bass you'll be fine, but if your chasing numbers then the position of the sub to the port makes a big difference Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.