SilveradoGoesBang Posted April 17, 2012 Report Posted April 17, 2012 I have 20x28x55" to work with which is 17.8 cubic feet. Is that to small for 4 skar vvx 15s? "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place
Lbox88 Posted April 17, 2012 Report Posted April 17, 2012 Should be fine theoretically, give them each about 3 cubes for a total of 12, leaves you 5 cubes for port and bracing displacement. UBL | Build Log
Skullz Posted April 17, 2012 Report Posted April 17, 2012 Really going to depend on a few things but first you'll lose .80cf in displacement alone and then you'll lose some in bracing and finally some in port displacement but if you can keep it around 3.5 cf to 4cf per you should be fine. 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
carshateme Posted April 17, 2012 Report Posted April 17, 2012 Should be fine. New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center]
SilveradoGoesBang Posted April 17, 2012 Author Report Posted April 17, 2012 Thanks guys I'll be giving 750-900 a piece so if it's a little smaller should help make up for it. "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place
Recommended Posts
Archived
This topic is now archived and is closed to further replies.