Jason_D Posted April 20, 2012 Report Posted April 20, 2012 in the format i compete in in the uk, i need below 6k RATED power, what would the NS-1 do at 1.4ohms on paper? Thanks Quote
OrionStang Posted April 20, 2012 Report Posted April 20, 2012 NS-1 is probably over 6k at 1.4. How does your org measure power? By whats on paper, or do they clamp it? Quote SMD Super Seller My Feedback Thread
Jason_D Posted April 20, 2012 Author Report Posted April 20, 2012 by whats on paper, hence asking for the rated powers. Quote
corey0928 Posted April 20, 2012 Report Posted April 20, 2012 Just curious but why is it 1.4 ohms? Quote
img Posted April 20, 2012 Report Posted April 20, 2012 Based on 6500 @ 1 ohm 3300 @ 2 ohm 1800 @ 4 ohm You'd be looking at around 5.3kwrms (thats if my maths is still up to scratch lol) Quote Audi A4 Avant Dual 210a Alts - Spl Dynamics D6 - 2 x Fi SP4 15 Boot Install
OrionStang Posted April 20, 2012 Report Posted April 20, 2012 Should be good if it goes by whats written. Quote SMD Super Seller My Feedback Thread
Jason_D Posted April 20, 2012 Author Report Posted April 20, 2012 its at 1.4 cause the subs are dual 1.4's. will be wired to 2.8 each then down to 1.4, currently have a 3500 on each sub, but want to drop power. and i just fried the amps Quote
pa-pa-platypus Posted April 20, 2012 Report Posted April 20, 2012 how do they check it? like right before you do ur run when ur in the lanes? Quote This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4
corey0928 Posted April 21, 2012 Report Posted April 21, 2012 I've never heard of any comps doing it by what you might be wired too. It's usually what it's rated at for Max power possible Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.