Dual inputs and fusing.

[EVL-100]

So im gonna run dual inputs on a saz-3500, sundown say 300a fuse for the 3500.

With the duals would I run dual 300a fuses or dual 150a fuses?

Thanks guys.

[wizart383]

One 150 amp fuse per positive input.

[finkster]

you would run dual 150.

[EVL-100]

This was my thinking just wanted to double check thanks guys.

[AMI CUSTOMS]

I would run 300 amp fuses for each line. Fuse to the rating of the cable for this type of setup and not the rating into the amp. Otherwise you aren't gaining anything with the dual inputs.

[LoudNLow931]

I would run 300 amp fuses for each line. Fuse to the rating of the cable for this type of setup and not the rating into the amp. Otherwise you aren't gaining anything with the dual inputs.

This.

[vettedude102]

Kinda curious on this so bump

[EVL-100]

I ended up putting 150amp fuses in and so far no problems.

[Tarball]

150 would be the safe way to go. You want to fuse at or below your equipment fuse rating to protect it.

[dolarbilz]

I would run 300 amp fuses for each line. Fuse to the rating of the cable for this type of setup and not the rating into the amp. Otherwise you aren't gaining anything with the dual inputs.

^^ this