Kenne Bell 2010 Mustang GT: Speed (slow) and Sound Build

[OrionStang]

FML

This fucking sucks.

[fox_racin4]

makes me wonder if you got a bad amp, i havent had an issue with mine.. and i use the input to the 200.4 then output to a 125.2, then to anoher 125.2 and havent had an issue yet

[OrionStang]

This 200.4 had to be sent in once already, BNIB.

[tacomaguy1]

How did it sound otherwise....the ib setup

[OrionStang]

Pretty good. Not a ground pounding setup obviously, but very good sound all the way down into the mid 20hz range.

[Twostrokeking]

VIDS

[andygardner]

VIDS

I think trying to hear how good it sounds with no mids or highs would be a weird video

[conceptM]

The power handling of a tweeter drops really fast when you lower the crossover frequency. My scanspeak tweeters could handle frequencies down to 1800Hz, but needless to say they won't handle 80 Watts RMS that "low", it drops to about 30~40 Watts. What were your cross over settings like?

Great build btw! Nice to see you cover almost every style in Caraudio

[OrionStang]

VIDS

I think trying to hear how good it sounds with no mids or highs would be a weird video

No tweets, one working mid, one mid that cuts in and out, and one of the two subs is working. Yeah that'd be a great video of FAIL.

The power handling of a tweeter drops really fast when you lower the crossover frequency. My scanspeak tweeters could handle frequencies down to 1800Hz, but needless to say they won't handle 80 Watts RMS that "low", it drops to about 30~40 Watts. What were your cross over settings like?

Great build btw! Nice to see you cover almost every style in Caraudio

They were crossed a 3000hz. I don't think it was overpower. Id be willing to bet it was the rca signal from the 200.4 to the 125.2

[BobbyG2]

db-r time? Or just tossing it and getting a new one?