Tim Lam Posted July 19, 2012 Author Report Posted July 19, 2012 ditch the mirror and build a wall!! haha nice stuff man. looks good. got any more pics of build? any electrical or amp shots or vids or numbers? ninjad haah ill let you upload yeah haha finished it late tonight. ill try to have the pictures of what i have done tomorrow!
Tim Lam Posted July 19, 2012 Author Report Posted July 19, 2012 Pioneer GM-3400T, nothing special. (was my first amp for a kicker comp before i knew anything haha) came in handy for my door speakers! looks bad, but than again who's going to be looking at the side of my amp rack lol... wiring for the Pioneer behind the MRP-M1000
Tim Lam Posted July 19, 2012 Author Report Posted July 19, 2012 Messy wires from the distribution blocks to the amps. 0awg from the battery and split into 4awg and 8awg. Kicker DS693 put in(still needs to be cleaned and tucked)
UMDSmith Posted July 19, 2012 Report Posted July 19, 2012 The mirror just needs to be slid back on and tightened. The clip didn't come of the windshield. Even if it does, loctite makes a spray/glue system to put it back on.
Tim Lam Posted July 19, 2012 Author Report Posted July 19, 2012 The mirror just needs to be slid back on and tightened. The clip didn't come of the windshield. Even if it does, loctite makes a spray/glue system to put it back on. actually just did that. lucky had a set of star pattern drill bits that fit the screw!
UMDSmith Posted July 19, 2012 Report Posted July 19, 2012 actually just did that. lucky had a set of star pattern drill bits that fit the screw! Nice, just don't use a drill. Hand tighten only in this situation.
Tim Lam Posted August 12, 2012 Author Report Posted August 12, 2012 oh look what came in the mail;) lol just had to get it in, was missing bass for about a week and just wanted to get some bump back in. the bc2k on the old throne of the now sold Alpine M1000.
Tim Lam Posted August 12, 2012 Author Report Posted August 12, 2012 new amp/battery rack in the works;) building from the foundation up! top piece for the bc2k to be showcased & weights for maximum adhesion!
SnowDrifter Posted August 12, 2012 Report Posted August 12, 2012 Looking good bro! ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Tim Lam Posted August 12, 2012 Author Report Posted August 12, 2012 simple and practical design. bc2k ontop, pioneer 2 channel underneath and the mounting sleeve for a kintik hc1800 on the empty right side. will also give me room to mount more fuse holders and make it look clean:D
Recommended Posts
Archived
This topic is now archived and is closed to further replies.