adreano17 Posted June 29, 2012 Report Posted June 29, 2012 Some corners of my box are chipped, can i get some putty to shape it into place? Also, some joints of my box are not matching kinda unlevel. Can silicone filler fix this? Thanks. Quote Pioneer AVH-p5700DVD | MB Quart Onyx ONX4.125 | 6.5 Alpine Type-S component & 6x9 3-way | Hifonics Brutus brz1700.1d | 2 - 12" Kicker L7 | Custom box tuned to 36 hz | 220A Mechman Alternator | 1/0 OFC Welding all the way back | Big 3 | 2 Farad Tsunami Cap | Deka 9a34 | 20% Tint | 6000K HIDs | Yellow Projector Fogs | Dual Out Magnaflow
adreano17 Posted June 29, 2012 Author Report Posted June 29, 2012 what went wrong? Cutting without a table saw but some joints IDK Quote Pioneer AVH-p5700DVD | MB Quart Onyx ONX4.125 | 6.5 Alpine Type-S component & 6x9 3-way | Hifonics Brutus brz1700.1d | 2 - 12" Kicker L7 | Custom box tuned to 36 hz | 220A Mechman Alternator | 1/0 OFC Welding all the way back | Big 3 | 2 Farad Tsunami Cap | Deka 9a34 | 20% Tint | 6000K HIDs | Yellow Projector Fogs | Dual Out Magnaflow
ChevyBoy95 Posted June 29, 2012 Report Posted June 29, 2012 depends how bad. I dont use a table saw, but i get clamps, a t square that is 48in long or a straight scrap piece of MDF, clamp it down and use it as a guide, so even withouth a tablesaw i can get perfect cuts with little effort. Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
blownengine Posted June 29, 2012 Report Posted June 29, 2012 Sandpaper, bondo, and a fair bit of time and correct minor misalignment of pieces. it won't fix half inch gaps or things like that. Quote 2003 Dodge Ram 1500 SLT (Yea its got a Hemi)Alpine CDA-105KnuKonceptz 0ga CCA Big 3 with Yellow Top 15" SoundQubed HDC3DC Audio 1.2K (Bass)Pioneer 6x9's (Front)Pioneer 6.5's (Rear)Kicker 3.5's (Dash)Sony amp on the highs. (Hey it was free)
adreano17 Posted June 29, 2012 Author Report Posted June 29, 2012 Sandpaper, bondo, and a fair bit of time and correct minor misalignment of pieces. it won't fix half inch gaps or things like that. Its a quarter inch =/ Quote Pioneer AVH-p5700DVD | MB Quart Onyx ONX4.125 | 6.5 Alpine Type-S component & 6x9 3-way | Hifonics Brutus brz1700.1d | 2 - 12" Kicker L7 | Custom box tuned to 36 hz | 220A Mechman Alternator | 1/0 OFC Welding all the way back | Big 3 | 2 Farad Tsunami Cap | Deka 9a34 | 20% Tint | 6000K HIDs | Yellow Projector Fogs | Dual Out Magnaflow
mttornquist Posted June 29, 2012 Report Posted June 29, 2012 I would just start over and make sure you take your time and measure at least twice! Quote My Build Log: http://www.stevemead...lmost-complete/
ChevyBoy95 Posted June 29, 2012 Report Posted June 29, 2012 if it is a quarter in off, i would re cut that 1 piece. you can fix 1/8in or 1/16in stuff but .25 is big. Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.