Miguels Posted April 1, 2015 Author Report Share Posted April 1, 2015 used the stock small case to test fit and it looks small but the large case will fill it in. still not going to marks the holes since the large case mount are 1/4 wider p.s cat decided to photo bomb me my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Jeremie Dufresne Posted April 1, 2015 Report Share Posted April 1, 2015 I really like the box, did you make it? Link to comment Share on other sites More sharing options...
Miguels Posted April 1, 2015 Author Report Share Posted April 1, 2015 which one? the first one, 2nd or 3rd? the first one i designed it freestyle mode. the other 2 drawings was made by ram designs. im not going to use those design and go.. first one was before the sp4 came out. the second one looks like a total fail. he design it at 2.5 sealed which is too large for the sub. 1.75 to 2.0 is what it needs to be my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted April 5, 2015 Author Report Share Posted April 5, 2015 did a bid of work.. after checking things out i decided not to send the alt in and spend more money on it to have the case changed.. i moved things around and found a way to do it. the original plan did not work so i have to redo the template for the dual alt bracket. i think it will work for when i have money to upgrade to hairpin.. still dual 350a does not sound bad at all my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted April 5, 2015 Author Report Share Posted April 5, 2015 the tape on there was to add more cardboard to it.. i want the bracket to be as beefy as possible.. im also going to do a back support from the header to the alternator. with as much torque this engine has its better to have it solid my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Neto562 Posted April 5, 2015 Report Share Posted April 5, 2015 Looking good bro!!! The bracket is going to come out hella nice!!! Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted April 5, 2015 Report Share Posted April 5, 2015 Looking good bro!! Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
Miguels Posted April 22, 2015 Author Report Share Posted April 22, 2015 got a few bolts and nuts from work and decided to work on the truck for a few minutes. the bolts fit the alt but did not fit the stock bolt holes on the bracket so had to buy a bit kit from auto zone. the cheap bits actually put in work and cut through the brackets like butter. so on with the alts a mocked up the cardboard with the alternators and drilled the holes to bolt it in. i took the time to do this to check for hood clearance and im glad i did. it avoided extra work with the steel plate and recutting. as you will see on the last picture i had a bit of clearance issues but it looks like its not much and can work on it once the steel is marked here is how it will look my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
DavidClark Posted April 22, 2015 Report Share Posted April 22, 2015 Putting in some work on this beast ! Pioneer 80PRS 4 Scan Speak discovery 4" full rage 2 Ampere Audio 6.5 Comp sets 3 Singer 370 Hairpin's 1 Odyssey g78/34-P1500 6 DieHard Platinum Marine g31 4 XS D3100's DC 175.4 DC 90.4 4 DC 5k's 4 m3 lvl 5 15's Soundrive RCA's Lots of welding lead & SkyHigh Team DC AUDIO Link to comment Share on other sites More sharing options...
aculous Posted April 22, 2015 Report Share Posted April 22, 2015 subbed, just started lookin around at the 454SS's godamn they are expensive. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.