zack_e89 Posted July 10, 2012 Report Share Posted July 10, 2012 I'm going to need some 300a fuses, I was going to order a bunch of these http://www.sonicelectronix.com/item_39077_Xscorpion-ANL300GL.html Does it even matter what ANL fuse I choose? Any input appreciated..... Quote 97 Suburban 8 custom PSI Platform 3 18's Link to comment Share on other sites More sharing options...
SnowDrifter Posted July 10, 2012 Report Share Posted July 10, 2012 Those are the ones I use. Note about using large fuses: If your wire shorts out, it will blow the fuse faster with a smaller fuse than with a larger one Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
zack_e89 Posted July 10, 2012 Author Report Share Posted July 10, 2012 thanks snowdrifter Quote 97 Suburban 8 custom PSI Platform 3 18's Link to comment Share on other sites More sharing options...
HunterJohnson Posted July 10, 2012 Report Share Posted July 10, 2012 I wire them with my amp loads. Even tho I have 2/0 wire that can carry over 300 amps of current I fuse a 150amp ANL fuse before my skar 1500. Quote Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass Link to comment Share on other sites More sharing options...
zack_e89 Posted July 10, 2012 Author Report Share Posted July 10, 2012 I wire them with my amp loads. Even tho I have 2/0 wire that can carry over 300 amps of current I fuse a 150amp ANL fuse before my skar 1500. Right on, HJ My new amp(in sig) will require a 300a inline fuse so I'll have to switch everything to that. All my fuses are 200a right now, in accordance with my AQ2200. Quote 97 Suburban 8 custom PSI Platform 3 18's Link to comment Share on other sites More sharing options...
HunterJohnson Posted July 10, 2012 Report Share Posted July 10, 2012 (edited) You'd probably be fine running a 200 anl fuse for the rockford amp. If not move up to 250 but you definitely dont need 300. the way I check is 200x14.4=2880 watts 250x14.4=3600 watts Edited July 10, 2012 by HunterJohnson Quote Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass Link to comment Share on other sites More sharing options...
Kyblack76 Posted July 10, 2012 Report Share Posted July 10, 2012 You'd probably be fine running a 200 anl fuse for the rockford amp. If not move up to 250 but you definitely dont need 300. the way I check is 200x14.4=2880 watts 250x14.4=3600 watts Your right HJ, I run a 2hun on my 2500bdcp hot cable,... and its been more than fine.... and a 3hun on my alt charge cable Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
HunterJohnson Posted July 10, 2012 Report Share Posted July 10, 2012 i wish my buddy would understand like you guys. he runs a 400 amp fuse on his 1/0 cca wire bc he thinks its Quote Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass Link to comment Share on other sites More sharing options...
zack_e89 Posted July 10, 2012 Author Report Share Posted July 10, 2012 SPECIFICATIONS MODEL- POWER T2500-1bd CP Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts 4 Load Mono 1,500 Watts x 1 2 Load Mono 2,500 Watts x 1 1 Load Mono 2,500 Watts x 1 Continuous Power Rating (RMS) - Two Amplifiers in bdSYNC Configuration 2 Load bdSYNC Mono 5,000 Watts x 1 Dimensions: Height 2.14" (5.44cm) Width 8.14" (20.68cm) Length 21.875" (55.66cm) Battery Fuse Rating (Amp) External (Not Supplied) 300A From the manual......I'm really confused now...... http://www.rockfordfosgate.com/support/rftech.aspx?kbsrc=http://rftech.custhelp.com/cgi-bin/rftech.cfg/php/enduser/std_adp.php?p_faqid=988&p_li=&p_topview=1#knowledge Quote 97 Suburban 8 custom PSI Platform 3 18's Link to comment Share on other sites More sharing options...
ZachG Posted July 11, 2012 Report Share Posted July 11, 2012 I only run 150amp fuses cause I don't need much more. 400 amp fuses are dumb for 1/0 DB link Quote 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.