siucsaluki11 Posted July 11, 2012 Report Posted July 11, 2012 Build a new box, if you cant take the squares off, try and work them so that its a smoother transition to them, not just a 3/4 inch jump up to them...if that makes sense. woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money.
bassface Posted July 11, 2012 Report Posted July 11, 2012 For the future I would definitely invest in a router, so much nicer looking when things are routed.
imnew59585 Posted July 11, 2012 Author Report Posted July 11, 2012 yeah i know, i mite find one on cl, but got to save up for the subs then try my box out,
imnew59585 Posted July 11, 2012 Author Report Posted July 11, 2012 also should i bed line , carpet, or fiberglass the new box? i heard that bed line boxes are louder, but fiberglass has the style but which would be the best
BassHead1990 Posted July 11, 2012 Report Posted July 11, 2012 sand it down and paint around the carpet lol! (2007 Chevy Tahoe LT) Mechman 320A OEM AGM D'Amore Engineering HLC-2 Sig Converter D'Amore Engineering E1500.1 Fi Audio Neo 3.5 12"
poorfish88 Posted July 11, 2012 Report Posted July 11, 2012 I'd scrap that box and use xp to make a new one. If the cuts are way off like you say it's a lost cause.
skittlesRgood Posted July 11, 2012 Report Posted July 11, 2012 how did you mess up your cuts with a table saw? is it a little portable one? you can make circles with a jig saw but yo cut down the full sheet i would invest in a circular saw. get a compass, measure it you to 5.5" or whatever your sub's cutout is divided by 2. then find your center on the board and use the compass to make a circle. now just follow the line with the jig saw. If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people.
imnew59585 Posted July 11, 2012 Author Report Posted July 11, 2012 dont ask me how I did , i dont even know
Recommended Posts
Archived
This topic is now archived and is closed to further replies.