bassface Posted July 26, 2012 Report Share Posted July 26, 2012 See if you can contact joe x on this site, he is very helpful in box designing specs. Psh...helpful in providing box specs, but not always knowing they will work or not. More helpful then you though Link to comment Share on other sites More sharing options...
siucsaluki11 Posted July 26, 2012 Report Share Posted July 26, 2012 my measurements are as follows. rear seat of dodge ram (quad cab). 21" from back of seat to front passenger seat in a some what mid lateral position and slightly tilted back. 28" from rear seat to bottom of rear window, 36" width wise to give a bit of room in the back seat for tool boxes. these numbers can be stretched and moved a bit if needed. ok, NO, give me the MAX dimensions the box can be built to, i don't want numbers and descriptions i want A"xB"xC" woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
CleanSierra Posted July 26, 2012 Report Share Posted July 26, 2012 See if you can contact joe x on this site, he is very helpful in box designing specs. Psh...helpful in providing box specs, but not always knowing they will work or not. More helpful then you though Haha, I won't provide a generic diagram like Joe does, NOT knowing the results. I know YOU are a fanboy of his box designs, but I'll trust a guy like 412CVX LONG before Joe. I really try to stay unbiased, but I've seen him whip up so many "designs" without ever knowing if they will perform in the real world. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
ALPINE408 Posted July 26, 2012 Report Share Posted July 26, 2012 Lmao that box has fail all over looks like your builder was playing guineie pig with you Is this going into a trunk or what a truck what car? Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
C-Fizzy Posted July 26, 2012 Report Share Posted July 26, 2012 See if you can contact joe x on this site, he is very helpful in box designing specs. Psh...helpful in providing box specs, but not always knowing they will work or not. More helpful then you though I'm sure cleansierra can copy and paste like joe does. under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy? Link to comment Share on other sites More sharing options...
ALPINE408 Posted July 26, 2012 Report Share Posted July 26, 2012 See if you can contact joe x on this site, he is very helpful in box designing specs. Psh...helpful in providing box specs, but not always knowing they will work or not. More helpful then you though Haha, I won't provide a generic diagram like Joe does, NOT knowing the results. I know YOU are a fanboy of his box designs, but I'll trust a guy like 412CVX LONG before Joe. I really try to stay unbiased, but I've seen him whip up so many "designs" without ever knowing if they will perform in the real world. Wait didn't. Cvx design that fail of a fail 4th order ported threw the rear seat? Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
CleanSierra Posted July 26, 2012 Report Share Posted July 26, 2012 See if you can contact joe x on this site, he is very helpful in box designing specs. Psh...helpful in providing box specs, but not always knowing they will work or not. More helpful then you though I'm sure cleansierra can copy and paste like joe does. I can copy and paste the SHIT out of some Torres screenshots and Google sketchups. Hahaha Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
ncc74656 Posted July 26, 2012 Author Report Share Posted July 26, 2012 36X28X21 W/H/D nothing, gutted Link to comment Share on other sites More sharing options...
CleanSierra Posted July 26, 2012 Report Share Posted July 26, 2012 See if you can contact joe x on this site, he is very helpful in box designing specs. Psh...helpful in providing box specs, but not always knowing they will work or not. More helpful then you though Haha, I won't provide a generic diagram like Joe does, NOT knowing the results. I know YOU are a fanboy of his box designs, but I'll trust a guy like 412CVX LONG before Joe. I really try to stay unbiased, but I've seen him whip up so many "designs" without ever knowing if they will perform in the real world. Wait didn't. Cvx design that fail of a fail 4th order ported threw the rear seat? I haven't followed a lot of his designs, but they seem to be more thought out. If I didn't trust myself to build boxes, I'd pay Ryan at RAM or Ray. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
ncc74656 Posted July 26, 2012 Author Report Share Posted July 26, 2012 the way speakers produce audio; the box is the resonating chamber but the front cone is what pushes the air towards the listener. so if this is blocked off sound would be muffled right? loss of quality? or does this not matter so much being that its all bass? is there a certain distance of air travel time a wave needs to reproduce a certain note? say if there is 1" of space in front of a sub it can only produce up to a 30hz note and for a 80hz note it would need 10"? is there anything like this to sound/sub design or no? nothing, gutted Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.