Dual Inputs_Types/Materials Benefits?

[Bump4life]

http://carphotos2.ca...67203_large.jpg

http://img21.imagesh...08/img8572w.jpg

who makes those? and how much? and are those better than what I have? do the "butts" fill up the whole terminal on amp?

[__d_a_v_i_d__]

Toolmaker makes them. and a few other people do aswell

[iwannabeloud]

toolmaker

[ALPINE408]

Sactown says there are copper ones I have just never seen them

K so take your dual input without wire attached put in your amp and tighten it down now look at pole the screw is locking down on only part of the bottom half is making contact to your amps imput hole unless I got an oversized 1/0 input on my amp there is only about 30% contact between the 2

so what is your opinion on dual inputs? is it a waste? have you done tests on gains or losses? im debating whether or not to use it. cause i know what your saying, it doesnt fill the whole terminal like my Knu Kollussus does. and the wire is 100 percent copper

ya thats what i am saying..

i have not done any testing i just tried them out saw that was like thats ghey

and don't see it as a benifit if i get more wire but lose on contact area

[Bump4life]

Toolmaker makes them. and a few other people do aswell

how do i contact toolmaker? or get those? and are they better than just a single run of OFC? like is there enough contact to amp? other people please chime in too

[basshead7890]

http://www.caraudioclassifieds.org/forum/toolmaker-price-quote-section/

email: [email protected]

[ChevyBoy95]

Sactown says there are copper ones I have just never seen them

K so take your dual input without wire attached put in your amp and tighten it down now look at pole the screw is locking down on only part of the bottom half is making contact to your amps imput hole unless I got an oversized 1/0 input on my amp there is only about 30% contact between the 2

so what is your opinion on dual inputs? is it a waste? have you done tests on gains or losses? im debating whether or not to use it. cause i know what your saying, it doesnt fill the whole terminal like my Knu Kollussus does. and the wire is 100 percent copper

ya thats what i am saying..

i have not done any testing i just tried them out saw that was like thats ghey

and don't see it as a benifit if i get more wire but lose on contact area

that would be a test someone would need to do involving resistance and current flow.

[Bmike]

let us know what kinda of qoute you get on some copper dual inputs.

[ALPINE408]

Sactown says there are copper ones I have just never seen them

K so take your dual input without wire attached put in your amp and tighten it down now look at pole the screw is locking down on only part of the bottom half is making contact to your amps imput hole unless I got an oversized 1/0 input on my amp there is only about 30% contact between the 2

so what is your opinion on dual inputs? is it a waste? have you done tests on gains or losses? im debating whether or not to use it. cause i know what your saying, it doesnt fill the whole terminal like my Knu Kollussus does. and the wire is 100 percent copper

ya thats what i am saying..

i have not done any testing i just tried them out saw that was like thats ghey

and don't see it as a benifit if i get more wire but lose on contact area

that would be a test someone would need to do involving resistance and current flow.

yup and why i said i did not test it i just didnt like the looks of it i have batt banks in the back with a short run of 1/0 the gain/loses would be very minamul for me so i don't see as a benifit

this is only my speculation.....

[Bump4life]

well i think copper is the way to go just need to be custom made for my amp. which will be the new DD M3b