Neckbeard Posted September 18, 2012 Report Share Posted September 18, 2012 I was wondering what kind of mistakes you guy's have made? For instance my friend asked me to install a new head unit, amp and sub. As he was trying to rush me, i completely forgot to amp control wire!! Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/ Link to comment Share on other sites More sharing options...
roscoe1129 Posted September 18, 2012 Report Share Posted September 18, 2012 not testing the impedance of 6 8" kicker subs purchased by a buddy and all the voice coils were labled wrong..... Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
Guest Posted September 18, 2012 Report Share Posted September 18, 2012 accidentally touching rca cable to amp casing...with the radio on. sparky sparky. edit: wiring 2 subwoofers together in parallel and forgetting to snake the bridging wires on the inside of the box and not on the outside. figured out 5 seconds later that i had to undo what i did in order for the subs to actually fit in the box. Link to comment Share on other sites More sharing options...
Azagtoth502 Posted September 18, 2012 Report Share Posted September 18, 2012 when i was young grasshoppa i hooked up amp to door speakers without unhooking wires from radio. radio speaker channel went poof pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls Link to comment Share on other sites More sharing options...
reg93f150 Posted September 18, 2012 Report Share Posted September 18, 2012 was being constantly rushed so my friend could hear his 2 sony explodes.. so i "accidently" cut the power wire too short from the battery to the amp, so he had to wait another day to order the wire.. oops haha ALL CREDIT TO XX1 FOR DC BANNER down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub Link to comment Share on other sites More sharing options...
Guest Posted September 18, 2012 Report Share Posted September 18, 2012 was being constantly rushed so my friend could hear his 2 sony explodes.. so i "accidently" cut the power wire too short from the battery to the amp, so he had to wait another day to order the wire.. oops haha well thats kind of a dick move on your part.... Link to comment Share on other sites More sharing options...
fox_racin4 Posted September 18, 2012 Report Share Posted September 18, 2012 if i was him i would have strangled you with it.. 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
bigmescan Posted September 18, 2012 Report Share Posted September 18, 2012 ummmmm putting power wire in the ground terminal and then did it again to my highs amp as well.................and leaving a receipt of my purchase of amps and wifey found it....................... SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74 Link to comment Share on other sites More sharing options...
reg93f150 Posted September 18, 2012 Report Share Posted September 18, 2012 well it actually was an accident not purpously haha, he was over my back and constantly telling me hurry hurry cmon dude cmon and just kept touching me and moving me out of the way so it really was an accident haha ALL CREDIT TO XX1 FOR DC BANNER down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub Link to comment Share on other sites More sharing options...
Guest Posted September 18, 2012 Report Share Posted September 18, 2012 well it actually was an accident not purpously haha, he was over my back and constantly telling me hurry hurry cmon dude cmon and just kept touching me and moving me out of the way so it really was an accident haha "accident" means on purpose. accident means accident. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.