revoracing247 Posted June 23, 2014 Author Report Share Posted June 23, 2014 alright finally got more done on the box! slowly but surely it's coming along! so i forgot to take a picture of the bondo after i've applied it but i put bondo on all the bends and stuff and then spent a good long time sanding it all down smooth.(thank you power sanders!) so here's the pics of the after effects and well there was still a bit of a dip coming into the port so i decidied to make it as smooth as possible. also the dip there would be visible by everyone since it's so close to the port exit. so another thick layer of bondo that will hopefully be the last one! so thats that. i also bought some roll on paint and primer. going gloss forest green for the inside and then im thinking flat black for the outside but no sure I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
revoracing247 Posted June 23, 2014 Author Report Share Posted June 23, 2014 oh also finally fixed my passenger door! first time fiberglassing anything other then curfed wood so i was a little nervous but it came out good here's the problem. as you can see the screws broke the plastic around the holes and pulled through. so i removed that vertical flange and then scuffed everything smooth and then 4 layers of fiberglass later... and then once it was dried. (not much difference haha) so finally after like 6 months my door has gone from this back to this! so yeah just happy to have that fixed. and it better not break again! I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
REVOofRustler Posted June 23, 2014 Report Share Posted June 23, 2014 So when will I get to hear the T Line?! 2002 Dodge Dakota 4.7 club cab - Sold 2004 Audi S4 Avant - Fi and Crescendo - Stock Bose System - http://www.stevemeadedesigns.com/board/topic/147725-2002-dodge-dakota-end-of-the-road/?hl=%202002%20%20dakota 136.4 Sealed @ 29hz 137.0 Drivers window open @ 26hz Link to comment Share on other sites More sharing options...
revoracing247 Posted June 25, 2014 Author Report Share Posted June 25, 2014 So when will I get to hear the T Line?! hopefully when i get back! or shortly after struggling to find a router to do the sub cutouts so we'll see how that goes and how much time i have before i come back I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
SnowDrifter Posted June 25, 2014 Report Share Posted June 25, 2014 So when will I get to hear the T Line?! I'll play you rock/paper/scissors for first demo ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
REVOofRustler Posted June 25, 2014 Report Share Posted June 25, 2014 So when will I get to hear the T Line?! I'll play you rock/paper/scissors for first demo Speaking of which, I still need to get a demo of your new setup! Revoracing - when do you get back from school? 2002 Dodge Dakota 4.7 club cab - Sold 2004 Audi S4 Avant - Fi and Crescendo - Stock Bose System - http://www.stevemeadedesigns.com/board/topic/147725-2002-dodge-dakota-end-of-the-road/?hl=%202002%20%20dakota 136.4 Sealed @ 29hz 137.0 Drivers window open @ 26hz Link to comment Share on other sites More sharing options...
Karkov Posted June 26, 2014 Report Share Posted June 26, 2014 Looks good, tuned in for the end result 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
mrd6 Posted June 26, 2014 Report Share Posted June 26, 2014 So when will I get to hear the T Line?!I'll play you rock/paper/scissors for first demo Speaking of which, I still need to get a demo of your new setup!Revoracing - when do you get back from school? I want in on this demo exchange! My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL Link to comment Share on other sites More sharing options...
revoracing247 Posted June 27, 2014 Author Report Share Posted June 27, 2014 So when will I get to hear the T Line?!I'll play you rock/paper/scissors for first demo Speaking of which, I still need to get a demo of your new setup!Revoracing - when do you get back from school? I want in on this demo exchange! haha i want a demo of yours, especially since last i heard yours it was the two XL's in a c pillar! also Chris'! i bet that subie is hating life lol we need to have a little meet then or something Bryan i get back end of july ish. really am shooting to have this done by the time i get home. but right now its gonna look like a choice between doing the circle cuts with a jig saw or a router Looks good, tuned in for the end result thanks man! hopefully will have some good videos of my door going ham sorry progress has been slow on this but i really do appreciate you guys still looking at the log. give me motivation to skip hw for a night and go work on the box haha speaking of, last night was one of those nights! so got a bit done but first i forgot to post this video. i redid my bass knob so that i could have the best of both worlds with the RCA knob and the AQ knob that goes in the amp. so here's the mediocre video i made lol alright now on to the box! got the one spot coming into the port all smoothed out so you can't tell where the board meets up with the curfed one. and then did some last minute sanding in some areas and then it was ready for primer! soo i first tried brushing it on but my brushes suck and was causing streaks and bumps in the primer so then i went and grabbed a roller and rolled on the rest. and here's the end result I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
REVOofRustler Posted June 27, 2014 Report Share Posted June 27, 2014 You're welcome to use my router when you get back! 2002 Dodge Dakota 4.7 club cab - Sold 2004 Audi S4 Avant - Fi and Crescendo - Stock Bose System - http://www.stevemeadedesigns.com/board/topic/147725-2002-dodge-dakota-end-of-the-road/?hl=%202002%20%20dakota 136.4 Sealed @ 29hz 137.0 Drivers window open @ 26hz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.