ZachG Posted October 23, 2012 Report Posted October 23, 2012 So I've been having this problem for awhile. I have knu 1/0 in my car going to a zx1500.1. The problem is I have to shave the wire a lot to fit it in the terminal and its not a tight connection. Who makes inputs for 1/0 knu for a 2011zx1500. pos and negative. I guess I need like a 2/0 to 4ga reducer so it would fit 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)
Mha Posted October 23, 2012 Report Posted October 23, 2012 Stinger has a 3/0 to 0 and 3\0 to 4 I think I out 2 0 gauge wires in it I was a tight fit. But cheaper the custom
ZachG Posted October 23, 2012 Author Report Posted October 23, 2012 I think 3/0 would be too big, how does it tighten, a screw or clamp 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)
ZachG Posted October 23, 2012 Author Report Posted October 23, 2012 Anyone? 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)
79 cutty Posted October 23, 2012 Report Posted October 23, 2012 hit up toolmaker....he made some for my Knu 4 ga. wire that I couldn't get into my JL HD900/5. Offset them and the wire fit in great. Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1
ZachG Posted October 24, 2012 Author Report Posted October 24, 2012 hit up toolmaker....he made some for my Knu 4 ga. wire that I couldn't get into my JL HD900/5. Offset them and the wire fit in great. My question is how to hit him up....is he a member here? 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)
MIKE-2U Posted October 24, 2012 Report Posted October 24, 2012 Facebook. Tool maker metal workz 2006 Jeep Grand Cherokee LaredoPioneer AVH- 3200DVD2/0 Flex-A-Prene Welding Cable (2) Fully Loaded Fi Sp4's dual 1-------> My YouTube Channel <------- Needs more power those woofers will laugh at that turd
BobbyG2 Posted October 24, 2012 Report Posted October 24, 2012 ^Facebook or pm this guy: http://www.caraudioc...bers/toolmaker/ *New vehicle and system coming soon.*
ZachG Posted October 24, 2012 Author Report Posted October 24, 2012 Facebook. Tool maker metal workz Yea nothing comes up when I type that in 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)
ZachG Posted October 24, 2012 Author Report Posted October 24, 2012 ^Facebook or pm this guy: http://www.caraudioc...bers/toolmaker/ Link doesn't work, says I don't have access 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.