Jbiddle530 Posted November 13, 2012 Report Posted November 13, 2012 hers my build hope you guys like i used ultra light 3/4" mdf the entire enlclosure about 40 lbs its 2.5 net volume and tuned to around 33 or 34 hz i am running one fosgate p3 12 on 600 rms (want to upgrade to t2 and 1k later)
Neckbeard Posted November 13, 2012 Report Posted November 13, 2012 is that amp just chillin back there? better mount that bad boy down Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/
rocking.that.eclipse Posted November 13, 2012 Report Posted November 13, 2012 Isn't that also a 2 channel amp? If it is bridge that m-fer
Jbiddle530 Posted November 13, 2012 Author Report Posted November 13, 2012 no for both its bolted to that trim panel... and its a 4 channel i just had the rear two channels running the sub and the front too runnin the mids and highs... the fosgate 600.1 that matches the amp you see there... just havent hooked it up yet..
Jbiddle530 Posted November 13, 2012 Author Report Posted November 13, 2012 i also have an amp rack on the other side that i build and im gonna put my mono amp there and also gonna put a fosgate punch p3002 the 600 is gonna run the sub the 4004 that you see in the picture is gonna run the 4" midranges and tweeters and the punch p3002 is gonna run the 7 inch mid bass
ear2ear Posted November 13, 2012 Report Posted November 13, 2012 Well, how does it sound? It sure looks interesting! '09 Sierra Ext Cab - under construction (1) RF T2500-1 -running- (4) RF T1 12's (1) RF T1000-4 -running- (2) RF T1652-S Stock alt / battery -plus- (1) DC Power 230a & (2) Kinetik 1800 Buncha OFC Knu Buncha Second Skin Kenwood DDX814 - Alpine Imprint - RF 360.3
Jbiddle530 Posted November 14, 2012 Author Report Posted November 14, 2012 it sounds awesome to me i only have only heard the sub on 100 rms and it really impressed me ill post a vidd on youtube tomorrow and give you all the link and we will see what you all think.. i cant get it on more power quite yet but i got my car all wired up for 3 amps now i just need to get the rest of them and i cant wait to hear it. ill keep you guys posted. im really hoping i can get my hands on a t2 some time though cause i know that would rip hard in my car
StreetMetalBen Posted November 16, 2012 Report Posted November 16, 2012 I have always wanted to build a "blow-over" style box, never had the time or extra wood. haha
alaskanzx5 Posted November 16, 2012 Report Posted November 16, 2012 I have always wanted to build a "blow-over" style box, never had the time or extra wood. haha blow over?? t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
StreetMetalBen Posted November 16, 2012 Report Posted November 16, 2012 Its what i call it when the port "blows over" the subwoofer and both air paths exit the same opening. Im sure there is a proper name, i just cant remember it.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.