What have you used your IMSG to do? Please include videos.

[CJ18]

Finding the fs of a sub

Finding the tuning of a ported box

[Kyblack76]

Damn great thread Cody..... awesome.....

and what a great tool for the great job eh???

[CJ18]

I love it! Worth EVERY penny!

[meade916]

would you please turn that phone sideways....SMH.

haha.....great vids though

[CJ18]

haha sorry. hard to hold the phone, talk and do the work at the same time. Better than nothing though. I am starting to get the hang of running t/s specs. I am about to see what the difference in the specs will be when the sub is wired in parallel vs series.

[79 cutty]

Sounds dumb as hell, and I am not going to make a video of it.....but added bonus, can test 9V batteries and find out if they are still good! Had a couple I had sitting around for a while.....turns out they are all still good

[CJ18]

Just ran t/s specs on the same sub(DC Level 3 10 dual 1 ohm) series and parallel.

Series-

Re-3.0 ohm

Fs- 33.4hz

Re+Res- 29.1 ohm

Ro-9.81 ohms

Qms- 5.55

Qes- .57

Qts- .52

Mms- 224.77

Cms- .000101

Sd- 50.27 sq in

Vas- .53ft3

Parallel-

Re- .70 ohms

Fs- 33.4hz

Re+Res- 7.5 ohms

Ro-2.29 ohms

Qms-5.75

Qes- .59

Qts- .53

Mms- 265.77

Cms- .0000854

Sd- 50.27in2

Vas- .45ft3

I am no speaker builder and dont really know what these numbers mean, could someone tell me if it looks like I did this correctly?

[TonyD'Amore]

Just ran t/s specs on the same sub(DC Level 3 10 dual 1 ohm) series and parallel.

Series-

Re-3.0 ohm

Fs- 33.4hz

Re+Res- 29.1 ohm

Ro-9.81 ohms

Qms- 5.55

Qes- .57

Qts- .52

Mms- 224.77

Cms- .000101

Sd- 50.27 sq in

Vas- .53ft3

Parallel-

Re- .70 ohms

Fs- 33.4hz

Re+Res- 7.5 ohms

Ro-2.29 ohms

Qms-5.75

Qes- .59

Qts- .53

Mms- 265.77

Cms- .0000854

Sd- 50.27in2

Vas- .45ft3

I am no speaker builder and dont really know what these numbers mean, could someone tell me if it looks like I did this correctly?

That looks fantastic actually! The numbers should be the same whether parallel or series. With the exception of the impedance numbers obviously. Nice work! Very consistent

Edited November 16, 2012 by TonyD'Amore

[TonyD'Amore]

Just ran t/s specs on the same sub(DC Level 3 10 dual 1 ohm) series and parallel.

Series-

Re-3.0 ohm

Fs- 33.4hz

Re+Res- 29.1 ohm

Ro-9.81 ohms

Qms- 5.55

Qes- .57

Qts- .52

Mms- 224.77

Cms- .000101

Sd- 50.27 sq in

Vas- .53ft3

Parallel-

Re- .70 ohms

Fs- 33.4hz

Re+Res- 7.5 ohms

Ro-2.29 ohms

Qms-5.75

Qes- .59

Qts- .53

Mms- 265.77

Cms- .0000854

Sd- 50.27in2

Vas- .45ft3

I am no speaker builder and dont really know what these numbers mean, could someone tell me if it looks like I did this correctly?

Just curious, what are you using to add mass to the cone?

[CJ18]

Play dough