w87will Posted January 24, 2008 Report Posted January 24, 2008 I have my Two Dc lvl 4's and each has its own Bxi1606D powering them. These amps dont have master/slave, So would I just hook the amps up like normal to the subs and then just have my Rca connecting the two amps? Btw: the subs are sharing the air space in One box... Is there anything special about wiring the subs up for this? Quote
audiofanaticz Posted January 24, 2008 Report Posted January 24, 2008 id set your amps with a scope for the most precise tuning. Or buy a maxlink to strap your amps together. Its normally not a big deal, but using two seperate amps on 2 seprate subs sharing the same airspace is not good unless everything is matched. Quote
w87will Posted January 24, 2008 Author Report Posted January 24, 2008 id set your amps with a scope for the most precise tuning.Or buy a maxlink to strap your amps together. Its normally not a big deal, but using two seperate amps on 2 seprate subs sharing the same airspace is not good unless everything is matched. Hmm yeah I tried seting both amps exactly the same, But other than that, its correct? I might have to get a maxxilink. I notice sometimes when it hits low I kinda see one sub moving when the other isnt....That cant be good and it scars me Thats why Im asking. Quote
audiofanaticz Posted January 24, 2008 Report Posted January 24, 2008 yea, its not good, that means more then likely that one amp is set differently then the other amp. maxlink ftw! Quote
littleitaly1990 Posted January 24, 2008 Report Posted January 24, 2008 I get that problem at high volumes even with master/slave....I think it may be the tradeoff for not using a separator in the box Quote A vitrolic, megalomaniacal sadistic psychopath.
w87will Posted January 24, 2008 Author Report Posted January 24, 2008 Ill have to see how much I can get a maxlink for. It'll make things alittle easier. For now I might do some testing and try and get the amps set the same. They are almost dead on right now I believe. I get that problem at high volumes even with master/slave....I think it may be the tradeoff for not using a separator in the box You have yours hooked up to two or one amp? Cause this is the first time this has happened to me with the subs moving differently sometimes. First time running two amps to two subs also. Quote
littleitaly1990 Posted January 25, 2008 Report Posted January 25, 2008 Ill have to see how much I can get a maxlink for. It'll make things alittle easier. For now I might do some testing and try and get the amps set the same. They are almost dead on right now I believe. You have yours hooked up to two or one amp? Cause this is the first time this has happened to me with the subs moving differently sometimes. First time running two amps to two subs also. two amps two subs bro... Quote A vitrolic, megalomaniacal sadistic psychopath.
memphis_finest1 Posted January 25, 2008 Report Posted January 25, 2008 Hmm yeah I tried seting both amps exactly the same, But other than that, its correct? I might have to get a maxxilink. I notice sometimes when it hits low I kinda see one sub moving when the other isnt....That cant be good and it scars me Thats why Im asking. Totally off topic but where did you get you profile pic at the one with the dc subs on it ? - Quote ALLAH's the most gracious, he made the universe the most spaciousSeen and heard in all places, but still appear facelessEmbraces all races, all caste and all casesIn every spec of life he's the substance of all traces
littleitaly1990 Posted January 25, 2008 Report Posted January 25, 2008 Totally off topic but where did you get you profile pic at the one with the dc subs on it ? - They are his subs Look at his build Quote A vitrolic, megalomaniacal sadistic psychopath.
kingsuv Posted January 25, 2008 Report Posted January 25, 2008 It takes awhile to tune each amp to each other. I know cause I had 8 amps pushing 16 subs. You will have to set and recheck then recheck again. Then use a different tone and check again. Then check again and adjust the sub sonic, and bass boost Maybe, just maybe it will be close. Then record the subs playing and slow down the tape and see how close you really are Quote Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out. not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.