mrd6 Posted December 5, 2012 Report Posted December 5, 2012 2.5 cubes to be tuned so low might just be the problem. I'm at 3.33 at 29hz on my RF 15 and it still doesn't get the lowz like I want it. I'm going to two JBL 10s soon and looking to do it in the same 3.5 cubes tuned to 27. I'm looking to play low 20s audibly and loudly. but what's weird is that I can paper trick nicely in the teens. Didn't read past this point so it may have already been confirmed but I would bet this is the problem. You have way too small of an air space to be tuned so low. Air space in the box I mean, if you want to get that low I would try something more like 3.5-4 cubes tuned 29-30. Should play nicely from the mid twenties to the high 40s and then roll off after that. My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL
RooTxBeeR Posted December 5, 2012 Author Report Posted December 5, 2012 2.5 cubes to be tuned so low might just be the problem. I'm at 3.33 at 29hz on my RF 15 and it still doesn't get the lowz like I want it. I'm going to two JBL 10s soon and looking to do it in the same 3.5 cubes tuned to 27. I'm looking to play low 20s audibly and loudly. but what's weird is that I can paper trick nicely in the teens. Didn't read past this point so it may have already been confirmed but I would bet this is the problem. You have way too small of an air space to be tuned so low. Air space in the box I mean, if you want to get that low I would try something more like 3.5-4 cubes tuned 29-30. Should play nicely from the mid twenties to the high 40s and then roll off after that. Yeah new one is designed already, 3.5Cu ft, 28Hz tuning, and 12.5sq in of port per ft On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
wmrcs Posted December 5, 2012 Report Posted December 5, 2012 2.5 cubes to be tuned so low might just be the problem. I'm at 3.33 at 29hz on my RF 15 and it still doesn't get the lowz like I want it. I'm going to two JBL 10s soon and looking to do it in the same 3.5 cubes tuned to 27. I'm looking to play low 20s audibly and loudly. but what's weird is that I can paper trick nicely in the teens. Didn't read past this point so it may have already been confirmed but I would bet this is the problem. You have way too small of an air space to be tuned so low. Air space in the box I mean, if you want to get that low I would try something more like 3.5-4 cubes tuned 29-30. Should play nicely from the mid twenties to the high 40s and then roll off after that. Yeah new one is designed already, 3.5Cu ft, 28Hz tuning, and 12.5sq in of port per ft Build it and report back E34 540iT/6
RooTxBeeR Posted December 5, 2012 Author Report Posted December 5, 2012 On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
Quiet Posted December 5, 2012 Report Posted December 5, 2012 in your current box, do you feel the air move but it's just not that loud when you get in the 20s? 2007 Pacifica Rebuild. Less quiet. Still not loud.
mrd6 Posted December 5, 2012 Report Posted December 5, 2012 New box looks much better! With that low of a tuning and port and box size you will lose alot of top end output but if the low lows are all you care about then this should do quite nicely My Build Log: http://www.stevemead...-sundown-power/ Team NorthWestSPL
RooTxBeeR Posted December 5, 2012 Author Report Posted December 5, 2012 in your current box, do you feel the air move but it's just not that loud when you get in the 20s? I can't even hit the 20's really, lowest I can go is 28 which is barely audible, I dont really get much of an output, I dont feel any air. New box looks much better! With that low of a tuning and port and box size you will lose alot of top end output but if the low lows are all you care about then this should do quite nicely i am really curious to see how much the high end goes bye bye On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
Recommended Posts
Archived
This topic is now archived and is closed to further replies.