FamilyB4Others Posted December 20, 2012 Author Report Share Posted December 20, 2012 Thanks for all the info bro. I finally found a place where I can record without disturbing anyone. Link to comment Share on other sites More sharing options...
FamilyB4Others Posted December 20, 2012 Author Report Share Posted December 20, 2012 Here is a shot of the enclosure, used the spare tire well for amps, fuses, .2 processor, and such... That is clean. Link to comment Share on other sites More sharing options...
Kyblack76 Posted December 20, 2012 Report Share Posted December 20, 2012 Thanks man...... That vid looked great. Do you like it so far? Any complaints? or other ideas? Does it play how you want ? what else do ya have planned? My thoughts,.. i would tint the windows, if i was you. Also, the factory DENSO alt is a very good stock unit. I would get a volt meter, a SMD VM obviously. On D'Amores facebook page, he has the pics of them getting the first 100 put together. So they will be for sale soon. Id snag one of those, mount it somewhere cool, (these are just my opinions man, take em or leave em) and i think it would help you keep an eye on your electrical. Again, the DENSO hairpin stock alt is pretty healthy. So, you could use your funds else where, if you hold fine.... Anyway, looking really good man. And nice work on a car that is really not to fun to work on... lol.. well done sir... Put your eyes on this when you have some time, and add if you can...Later bro. http://www.stevemead...rs-come-inside/ SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
FamilyB4Others Posted December 22, 2012 Author Report Share Posted December 22, 2012 I like the setup right now, If I did want to change anything it would be to upgrade to 15s if possible (space wised). Also I would like to get rid of the old stock radio and fiberglass a tablet in but you probaby know thats easier said than done. Would you happen to have info on how to do this as I heard the radio is wired on the same control board as the AC/header controls...? Funny thing is I had made a appointment to tint it today. But though I should wait til I put sound deadener in so I wouldnt scratch the new tint when taking apart the rear deck panels etc. Your right about the alternator, that thing is a beast for being stock. Ill have to look into the SMD VM thing, I do need a meter thats for sure. Yeah, this car is a bitch do a audio install comepare to most stock vehicles Also just got this 1 hr ago from the UPS guy. Hoping to atlease do the whole trunk and top rear deck... Link to comment Share on other sites More sharing options...
Kyblack76 Posted December 28, 2012 Report Share Posted December 28, 2012 Cool choice on the SMD-VM And i bet i have the schematic you need. Ill look. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
meade916 Posted December 28, 2012 Report Share Posted December 28, 2012 Kylar: i had to delete your images as they were confusing......it looked for a minute like it was HIS stuff. Its on his SOTM build thread so i don't want anyone to be confused. Post him a link to where he can see your pics instead of hijacking this thread. I know you didn't mean to though so its all good. Thanks! All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted December 28, 2012 Report Share Posted December 28, 2012 system looks real nice bro and great choice on the equipment! Love that port...a little bigger then i would try for those subs but if its working for you, that is great! how does it sound? I know it looks awesome! good luck on SOTM this month too! All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
ChillMasterWill Posted December 28, 2012 Report Share Posted December 28, 2012 very, very nice work dude, mad props and it's clean as well.... William - Metter,Ga. Dad, Self Installer/Fabricator & Repair Tech, Weightlifter, Motivator, Team SKAR Audio Captain, Team Deadly Hertz Georgia Leader 99 Toyota 4Runner SR5, "Rolling Thunder" Daily Driven, No Wall, C-Pillar Build, BASS LIFE! 2K16 SBN MECA Park and Pound DB3 Champion 2K16 SBN ISPLL Real SPL Class F Champion Second Skin Damplifier Pro, Kenwood eXcelon KDC X498, Clarion EQ, Knukonceptz RCA's The Big 3, Sky High Car Audio OFC & Kicker Hyperflex Silver Tinned 1/0 Gauge Singer 340a Alt, Northstar NSB-AGM31, SMSAGM480, 12 NessCaps Super Caps Rockford Fosgate 3Sixty Line Driver, The Oval Port Tuned To 31 Hz, CNC Machined 4 SKAR ZVXv2 D2 15's, 2 SKAR SK-4500.1's, 4 SKAR PAX 6.5's, 2 SKAR LP-80.4's MEMBER OF THE YEAR 2013If you don't have any haters, get some, best motivation there is... Link to comment Share on other sites More sharing options...
scooter99 Posted December 28, 2012 Report Share Posted December 28, 2012 Couple things: First where in Norcal are you? That video looked like it was in the undeveloped area of Natomas. But maybe not. Second, and maybe I'm mistaken, but by cutting out that pass through with only a hole like that, isn't that making it essentially a 6th order? Especially with the box sitting that far back. I cut mine out too though, but I cut the whole arm rest area out, not just a little of it. I have an 06 Civic, not the TSX but they're close to the same vehicle, basically anyway. Nice job, everything looks real clean. Also, if you wanted to get the other amp in there, you could always baffle it up at the top and let it hang upside down. Then both amps would be in that same compartment. Just a suggestion. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Kyblack76 Posted December 28, 2012 Report Share Posted December 28, 2012 Kylar: i had to delete your images as they were confusing......it looked for a minute like it was HIS stuff. Its on his SOTM build thread so i don't want anyone to be confused. Post him a link to where he can see your pics instead of hijacking this thread. I know you didn't mean to though so its all good. Thanks! Boss, Not even a problem. In fact, I was just going to do the same thing. I totally understand. Not a worry ....I will even remove more... Also, I'll look at the prints I have and mail them to you. I will say, removing the stock HU will be a pain. Trust me. It runs 2/3's the car. It's also a big reason I stopped where I did. But, if your willing, it would e pretty trick man. I'll let ya know tonight. Best of luck in SOTM. This month is freaking sick, with the prizes and such. Talk soon. Kb SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.