Jump to content

New rims and a broken engine for xmas


Recommended Posts

Posted

Well, I put some 20s on my jag x type, and then 5 days later on christmas eve, threw a rod or some shit, long story short, time for a new engine, I found one with 26k miles on it and its at the shop getting ready to undergo surgery, wish me luck is this tremendously expensive adventure. FUCK

XS-power1.jpg

Posted

DAMN! :(

Any idea how that happened?

Well a couple months after I got it I started noticing a knock, but it was random, sometimes it was there sometimes not, something finally gave out on christmas eve, the car still started but sounded like a bunch of broken metal parts screeching and banging around, when speaking with the shop his exact words were, we can spend a bunch of time and labor tearing the engine down to see what happened, or you can replace the motor which is still what you will need to do after we figure out exactly what happened. If you heard it you would agree lol, some one obviously fucked the motor up and traded it in. but what ever, the car is in awesome shape and with a new engine, i wont have to worry about it for a long time, and i will be able drive it without babying it.

XS-power1.jpg

Posted

I have been down that expensive road. Even if you know its coming, it still sucks.

Posted

also, I take very good care of my cars, my fusion now has 75k on it and if you look inside the oil cab the engine still looks like polished aluminum, no dark oil spots or smoke residue, when I change my oil i let the oil drain for about an hour then even do a rinse with a quart of oil just to flush out and junk in the oil pan, my fusion still runs like new, doesnt burn any oil or leak any. I did the same thing in the jag, but it was too late. Now that the motor in the jag will be fresh I will know how well it will be taken care of.

XS-power1.jpg

Posted

DAMN! :(

Any idea how that happened?

Well a couple months after I got it I started noticing a knock, but it was random, sometimes it was there sometimes not, something finally gave out on christmas eve, the car still started but sounded like a bunch of broken metal parts screeching and banging around, when speaking with the shop his exact words were, we can spend a bunch of time and labor tearing the engine down to see what happened, or you can replace the motor which is still what you will need to do after we figure out exactly what happened. If you heard it you would agree lol, some one obviously fucked the motor up and traded it in. but what ever, the car is in awesome shape and with a new engine, i wont have to worry about it for a long time, and i will be able drive it without babying it.

you'd be surprised the nastiest sounds in an engine can be the simplest things, if the car still starts it could be something simple in the timing belt/chain area

'93 Firebird Formula V8

H/U- Kenwood eXcelon KDC-X395

Mids/Highs Amp- Hifonics ZXI80.4

Wiring-KNU RCA's, Speaker Wire, And Two Runs Of Trystar 1/0

G34 Red Top and a 180amp Ford Alternator

www.youtube.com/TRTC360

Posted

I have been down that expensive road. Even if you know its coming, it still sucks.

Yea once I heard the random knocking i knew it was not good, I really just hoped it would go away lol.

But it was weird, sometimes it knocked, and sometimes it didn't, didn't seem so serious.

XS-power1.jpg

Posted

DAMN! :(

Any idea how that happened?

Well a couple months after I got it I started noticing a knock, but it was random, sometimes it was there sometimes not, something finally gave out on christmas eve, the car still started but sounded like a bunch of broken metal parts screeching and banging around, when speaking with the shop his exact words were, we can spend a bunch of time and labor tearing the engine down to see what happened, or you can replace the motor which is still what you will need to do after we figure out exactly what happened. If you heard it you would agree lol, some one obviously fucked the motor up and traded it in. but what ever, the car is in awesome shape and with a new engine, i wont have to worry about it for a long time, and i will be able drive it without babying it.

you'd be surprised the nastiest sounds in an engine can be the simplest things, if the car still starts it could be something simple in the timing belt/chain area

That was my first thought, but this turned into more of a jack hammer sound with lots of screeching

XS-power1.jpg

Posted

DAMN! :(

Any idea how that happened?

Well a couple months after I got it I started noticing a knock, but it was random, sometimes it was there sometimes not, something finally gave out on christmas eve, the car still started but sounded like a bunch of broken metal parts screeching and banging around, when speaking with the shop his exact words were, we can spend a bunch of time and labor tearing the engine down to see what happened, or you can replace the motor which is still what you will need to do after we figure out exactly what happened. If you heard it you would agree lol, some one obviously fucked the motor up and traded it in. but what ever, the car is in awesome shape and with a new engine, i wont have to worry about it for a long time, and i will be able drive it without babying it.

you'd be surprised the nastiest sounds in an engine can be the simplest things, if the car still starts it could be something simple in the timing belt/chain area

That was my first thought, but this turned into more of a jack hammer sound with lots of screeching

I could understand that, but before jumping to the conclusion that the motor had to be replaced I would have just had them take apart the front and top assembly of the engine to see what's going on, if the car starts and isn't smoking, no water mixed into the oil then it couldn't be that serious. I just hope that when they do replace the motor your old motor was in fact in very bad shape, not just another shop trying to make some extra money off a customer, hope everything works out well for you.

'93 Firebird Formula V8

H/U- Kenwood eXcelon KDC-X395

Mids/Highs Amp- Hifonics ZXI80.4

Wiring-KNU RCA's, Speaker Wire, And Two Runs Of Trystar 1/0

G34 Red Top and a 180amp Ford Alternator

www.youtube.com/TRTC360

Posted

Drain for an hour and rinse?? That's impressive. I thought I was bad waiting for my engine to reach running temp before driving.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...