xx1 Posted January 2, 2013 Author Report Posted January 2, 2013 thanks, so far its holding up great. audio related merchandise (decals,banners,lanyards,hats,shirt,etc)
SnowDrifter Posted January 2, 2013 Report Posted January 2, 2013 Good to hear! IMO epoxy is stronger than CA glue. But in theory, you shouldn't have an issue with either. I wonder if it was an issue with prep work. Do you know if these have ever been reconed? I don't think a lot of the manufacturers sand their stuff down before gluing as all of the recones I've done could be pulled off with a pair of pliers. But then the next time after I've prepped it, the spiders rip before I can get them off the basket. ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
xx1 Posted January 4, 2013 Author Report Posted January 4, 2013 Good to hear! IMO epoxy is stronger than CA glue. But in theory, you shouldn't have an issue with either. I wonder if it was an issue with prep work. Do you know if these have ever been reconed? I don't think a lot of the manufacturers sand their stuff down before gluing as all of the recones I've done could be pulled off with a pair of pliers. But then the next time after I've prepped it, the spiders rip before I can get them off the basket. they were never reconed. so in theory now my sp4 is stronger, should I put epoxy to the other now that I'm at it????? or wait for it to come loose and risk damaging it?? audio related merchandise (decals,banners,lanyards,hats,shirt,etc)
__d_a_v_i_d__ Posted January 4, 2013 Report Posted January 4, 2013 Good to hear! IMO epoxy is stronger than CA glue. But in theory, you shouldn't have an issue with either. I wonder if it was an issue with prep work. Do you know if these have ever been reconed? I don't think a lot of the manufacturers sand their stuff down before gluing as all of the recones I've done could be pulled off with a pair of pliers. But then the next time after I've prepped it, the spiders rip before I can get them off the basket. they were never reconed. so in theory now my sp4 is stronger, should I put epoxy to the other now that I'm at it????? or wait for it to come loose and risk damaging it?? I was about to say this, i would just pull it out and glue it more, cant do anything but help more. Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!!
Altima1 Posted January 4, 2013 Report Posted January 4, 2013 Well that's awkward... How does a spider ring come unglued with less than 1000 watts per sub? thats what worries me. I'm staring to wonder if they will be able to take a 3500 ea. lol too much excursion!! na it might be a defect but i have mine wired down to .35ohm on my AQ3500 and it takes it like a BOSS!! Ive clamped it over 3k @ 29Hz 149.4 Db @ 30Hz Outlaw With One 15" Fi Team Sub, Trunk Build. !!!!!Hair Tricks!!!!!Check Out The Build Log http://www.stevemead...0-4-and-t400-4/Watch The Videos http://www.youtube.com/user/jcplaya3
Recommended Posts
Archived
This topic is now archived and is closed to further replies.