-X-RaTeD- Posted April 4, 2013 Report Posted April 4, 2013 I want to build my box out of birch ply because of the weight savings over MDF. Has anyone built a box using a sheet of this "Tonmik 3/4 Top Choice Birch Hardwood" from Lowes? http://www.lowes.com/pd_37985-99899-37985_0__?productId=3658234 $46 a sheet locally. Ideally, I'd like to find a 4'x8' sheet of this locally, http://www.rockler.com/product.cfm?page=24530 14 ply's, all inner sheets solid birch, but $33 shipped for only a 24"x32" sheet, I'd need 6 sheets for my box, $165 shipped to my door, but a lot of the wood would be wasted... Anyone know a source in central Florida for 3/4" 14 ply solid birch 4'x8' sheet? If not, what do you think about that Lowes sheet? Thanks When I hear music, I fear no danger. I am invulnerable. I see no foe. I am related to the earliest times, and to the latest. ~Henry David Thoreau
ric006 Posted April 4, 2013 Report Posted April 4, 2013 well when when you think about it its not expensive other parts cost more
skittlesRgood Posted April 4, 2013 Report Posted April 4, 2013 the stuff from lowes and home depot will work but I'd only use it for smaller boxes or medium sized ones with a middle slot port. for a bigger build I would get the 14 ply sheets. you wont find it at a big store though. you need to go to a lumber yard. just search around on google for one. If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people.
-X-RaTeD- Posted April 5, 2013 Author Report Posted April 5, 2013 Yeah, going to be a sealed box for one 18, leaning towards the 14 ply sheets if I can find them. I found one lumber mill in my city on Google, I'll check them out. When I hear music, I fear no danger. I am invulnerable. I see no foe. I am related to the earliest times, and to the latest. ~Henry David Thoreau
Big-A Posted April 5, 2013 Report Posted April 5, 2013 Where are you located? 2004 Dodge Ram Head unit- Alpine iDA-x305s Sound processor- Clarion eqs746 Mids/Highs amp- Alpine MRV-F345 Sub Amp- Alpine MRD-M1005 Dash Speakers- (3) Dayton Audio rs75 Front Door- Skar SPX65c Rear fill- Skar SPX tweters and Dayton ND140 midbass Sub- Fi Audio SSD 15 high QTS SHCA power/ground cables and Stinger interconnect XS power D6500 under the hood and D680 in the amp rack Big 3+ with SHCA http://www.stevemeadedesigns.com/board/topic/161174-dodge-ram-quad-cab-fi-ssd15-skar-audio-alpine-shca/?p=2326251
-X-RaTeD- Posted April 6, 2013 Author Report Posted April 6, 2013 I'm in Lakeland When I hear music, I fear no danger. I am invulnerable. I see no foe. I am related to the earliest times, and to the latest. ~Henry David Thoreau
purplesyrup Posted April 6, 2013 Report Posted April 6, 2013 Yeah, going to be a sealed box for one 18, leaning towards the 14 ply sheets if I can find them. I found one lumber mill in my city on Google, I'll check them out.
purplesyrup Posted April 6, 2013 Report Posted April 6, 2013 You could get much better results, and likely take up a lot less space running a 12 in a ported enclosure, or even a 15 in ported
Zapanater Posted April 6, 2013 Report Posted April 6, 2013 Well, I don't claim to be an expert on wood, but I work at Menards and I know we carry it. 14 ply birch. We carry 7 ply to. I think the 7 ply is about 45 bucks a 4x8 sheet. If you're looking for an expert on wood I suggest you visit your local brothel. I'm amazed at the lack of trolling this thread. Beatiful title sir ahhahaaa. 2015 Subaru Outback. That is all, I refuse to touch it.
CleanSierra Posted April 6, 2013 Report Posted April 6, 2013 I was gonna just suggest ADAM, he's an expert.... Im not the one you want to try to troll. Just a fyi for you.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.