Jeep Wrangler "BAGDJ10K" Build

[Jagraj7870]

First time putting air ride on a vehicle TEAM MAYZN PROJECT

Before i get into posting some pictures heres a little list of whats already in my Jeep. This well help you understand why i did what i did there is a lot of weight in my Jeep so lowering it with springs won't do much especially if i was to have passengers

Interior:

Full "Katzkin" Leather, Custom Red Diamond Stitching & Logo "J-10K"
Custom Rear Seats, Fabricated to Sit On Top of 4 Batteries
Custom Door Pods, Fibreglassed & Painted to Match
Painted Roof Top "Factory Grey" With Dynamat and Dynaliner
Whole Jeep is Dynamated

Exterior:

24" Dropstar DS03 with Toyo Proxies Tires
Zinc Coated Cross Drilled Rotors
Callipers Painted Red to Match
Custom Front Grill
Custom Front Headlights
Full Led Kit, Underneath
MagnaFlow Mufflers with Cat
Rear Tire Cover Painted to Match

Audio:

(2) 18" SMD/AA Subwoofers 3,500rms Each
Kicker Warhorse (10,000) Amplifier for Subs
(3) Kicker IX500.4 Amplifiers for Mids/Highs
100ft of 2/0 Welding wire
(6) XS Power Batteries
(2) XS Power D5100 - In the front
(4) XS Power D3100 - In the back under neath the seats
DC Power Alternator 370xp
Rockford Fosgate 3sixty.3 - First one in Ontario*
Custom Box tuned to 30hz
(4) Kicker KS6.5 Comps
(2) Kicker 6.5" CVT Shallow Subwoofers - Midbass
Clarion NX501 Headunit
Kicker and Monster RCA's

Ipad in the dash

Heres a link to build thread if you want to see how that was all done

http://www.stevemeadedesigns.com/board/topic/120796-2-18s-in-jeep-wrangler-jk-w-kicker-amplifiers/

Pretty much my whole Jeep is packed with Audio and since i have 2 18" subs i have no space in my trunk.

One day me and my buddy (Frank) were discussing air-ride and how it would be soo cool to have a bagged Jeep. But again i didn't have much room and we were looking in the trunk, the side of the subwoofer box, the roof and basically gave up. But then i kept thinking about it and realized that i don't have much need for my spare tire anyways might aswell use the space to fit air-ride. At first i thought it was impossible because of the air lines, and that they would need to be able to flex but then i talked to my dads engineer.... who basically turned my dream in to a reality! BTW THIS IS NOT LAYED OUT

[Jagraj7870]

Jeep sitting stock height

Interior

[1koerner]

id think a bagged jeep would be cool ive always wondered how they would look layed out post pics plzzzz

[Jagraj7870]

How it all started

Using a milling machine to make some precise holes

First bracket

Joe and I making some supports to hold the compressors (using the milling machine to square the edges)

My dream becoming a reality?

Attention to detail is key!

http://s1235.photobucket.com/user/jagraj7870/media/IMG_0314.jpg.html?sort=3&o=34

Starting to take shape

[Jagraj7870]

id think a bagged jeep would be cool ive always wondered how they would look layed out post pics plzzzz

Due to it being 4x4, and already so much done to it (audio system) laying it out would require me to start everything over again completely because i would need to notch the frame the inside would also need to be notched for the frame. It turned out amazing so i hope like the end result

[1koerner]

gonna b sick i know how u feel about the notching i have a 2000 expedition that i bagged and we did a c-notch w/ a hinged bridge cover in case we need to get it from the topside and we had to rip out all the audio and rebuild the enclosure around the bridge/notch

[hdorre]

This is a.... different route that you're taking. 24s and bags. I have to admit that it doesn't look bad tho

[I.V]

Ok this is from another planet but is sick

[Jagraj7870]

gonna b sick i know how u feel about the notching i have a 2000 expedition that i bagged and we did a c-notch w/ a hinged bridge cover in case we need to get it from the topside and we had to rip out all the audio and rebuild the enclosure around the bridge/notch

yah if u see my build thread u will see why i don't want to notch, my box is wrapped in Katzkin

This is a.... different route that you're taking. 24s and bags. I have to admit that it doesn't look bad tho

thank you

[Jagraj7870]

Time to make a cage for the wheel cover

Magical bender

Team work

Time to size

Mounted

Testing if cover fits

Getting there

Team Mayzn experimenting how we gonna bend the lines