Cardboardcat15 Posted May 5, 2013 Report Share Posted May 5, 2013 K time for a new build log. My Corolla's tranny died, and I wasn't putting any more money into it just to see it dump on me one year down the road. Not to mention that little 4 banger with mad spark knock probably shouldn't have been dragging around 600 pounds of gear to and from San Bernardino on a daily basis. So now I've got this nice ol' Ram 1500. It's a long story how I got this truck, so to keep it simple I'll leave it at this. I'm a lucky SOB and the truck was gifted to me.Peep the stupid low odometer reading.Now, this is going to be my daily truck. (for work and school)With that being said, the goal for this build is to be as stealthy as possible. My aim is to keep everything as stock looking as possible minus the port, some knobs and mesh covers for the door panels. The box will be ported through the rear window.So, here's the equipment list. Everything underlined has already been acquired.Substage: 2 Fi SP4 18'sAmp: Batteries: 2) XS Power XP3000s, d1200 StartingMids and Highs: 4 Pyle PCW8S 8" midrange drivers2 Pyle/Pyramid super tweeters (Same exact tweeter, crossover and all)Highs Amp: CT Sounds 125.4Box: 4th order bandpass (44 hz, design courtesy of TBD Mike)Wire: 3 runs of + and - (Knu Kandy CCA)Here's some pichurz of what I've got in my possesion. Batterries are in transit (lols crescendo)Yes I did get pink and yellow wire. Fux wit me.I'm thinking about slapping a funkypup/Pyle sticker on the dustcap for lulzThey're blank dustcaps. Purchsed these bitches from Ken (orionstang)Same damn tweeter minus the paint. Only 3 pictured because one is in use.This is one of the four 8's, currently in use. I'm too lazy to disconnect the other for a picture. The other two are currently being shipped from Parts express.Again, the goal of this build is to be stealthy. I'm also aiming for "minimally invasive". Kind of like surgery but instead of a scalpel it's bolts and nuts and instead of surgery it's bass. I don't want to do anything permanent to the truck, like cut out the rear wall or something.Please note that this WILL be a progression. I'm still stacking every paycheck in order to fund this project. The only things left to pay for are the big check things. Need the Amp, Alt and to actually get the box built.I've got all the fiberglassing materials OTW as I type, so once those things arrive I'll pick up some spare door panels and start the Mids and Highs.Hopefully I'll be loud this time. My Channel on YouTube. Check it out for cinematic-style Car Audio videos. https://www.youtube.com/channel/UCcSMhtT-rpopJbdybubDgnQ New 2014 Scion TC 4th Wall Build https://www.stevemeadedesigns.com/board/topic/217173-2014-tc-4th-order-build-3-fi-sp4-15s/ Link to comment Share on other sites More sharing options...
Cardboardcat15 Posted May 5, 2013 Author Report Share Posted May 5, 2013 Alrighty, so the only real thing I've done with the truck so far is replace the HU. That's my old Kenwood from previous installs. Since I'm going for stealth, I'm actually not keeping the HU there. Putting the stock back there unhooked, and I'm gonna try and shoehorn a single DIN down under here As for the doors, I've actually got the room for 8's this time. Gonna stuff some LC1's down here, 1 for Bass and 1 for Mids and highs. I want to keep the HU at a constant volume setting and adjust it from here, that way I don't need to grab it every time I give a demo. Also, I'll need to look for a HU that's got a remote and iPod compatibilty. Not too hard. Since this is a single Cab, the window is right ad the back of the headrests. This is where the port will be going. Once I've got the wood purchased I'll pull that window out and go to town. It'll be a bitch to fab up some removable trim panels. I'll update again once I get the panels started! My Channel on YouTube. Check it out for cinematic-style Car Audio videos. https://www.youtube.com/channel/UCcSMhtT-rpopJbdybubDgnQ New 2014 Scion TC 4th Wall Build https://www.stevemeadedesigns.com/board/topic/217173-2014-tc-4th-order-build-3-fi-sp4-15s/ Link to comment Share on other sites More sharing options...
b-eazy Posted May 5, 2013 Report Share Posted May 5, 2013 I'm tuned in Link to comment Share on other sites More sharing options...
Kyblack76 Posted May 5, 2013 Report Share Posted May 5, 2013 I know those subs..... good luck.. Rolling my own SP4's... not as much as you.. but,.. Like your style... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
OrionStang Posted May 5, 2013 Report Share Posted May 5, 2013 SInce I saw this truck, i've been wanting a build done in it. Don't have much time these days, but if you need any help hit me up. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Cardboardcat15 Posted May 5, 2013 Author Report Share Posted May 5, 2013 Thanks guys. And ken ill let you know man. Cal is itchin to help me with this box lol. Ill def need some help with it. My Channel on YouTube. Check it out for cinematic-style Car Audio videos. https://www.youtube.com/channel/UCcSMhtT-rpopJbdybubDgnQ New 2014 Scion TC 4th Wall Build https://www.stevemeadedesigns.com/board/topic/217173-2014-tc-4th-order-build-3-fi-sp4-15s/ Link to comment Share on other sites More sharing options...
COLTON94 Posted May 5, 2013 Report Share Posted May 5, 2013 Guna be one stealthy set up. Guna tint the windows on the shell? Link to comment Share on other sites More sharing options...
CNF Kevosinn Posted May 5, 2013 Report Share Posted May 5, 2013 whattt your in so cal?? I gotta hear this thing!!! *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution Link to comment Share on other sites More sharing options...
04murdalanche Posted May 6, 2013 Report Share Posted May 6, 2013 tuneddddd Link to comment Share on other sites More sharing options...
Cardboardcat15 Posted May 6, 2013 Author Report Share Posted May 6, 2013 Guna be one stealthy set up. Guna tint the windows on the shell? Yeah man. Making sure no one can see into the back. Keeping everything as safe as possible. I normally work in some sketchy areas lmao whattt your in so cal?? I gotta hear this thing!!! For sure man, once it's all finished I'll let you know! I'm almost always at shows out here. My Channel on YouTube. Check it out for cinematic-style Car Audio videos. https://www.youtube.com/channel/UCcSMhtT-rpopJbdybubDgnQ New 2014 Scion TC 4th Wall Build https://www.stevemeadedesigns.com/board/topic/217173-2014-tc-4th-order-build-3-fi-sp4-15s/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.