Wood's -2011 Altima- AKA "Red Ruby" : New Build (pg.150) #SpringBling

[Joshex]

Love the car, man! I can see you take pride in building cars.

Check out my project if you'd like.

[Wood]

Alright, Lets get back to work... enough Rockford Admiration, time to get on to the BEAUTIFUL Components

But first, lets take these door panels off!

Stock 3" Tweeter.... Now let me tell ya'll something about Nissan.... THESE MF and whatever logic they had, DEFINATELY wasn't thinking about aftermarket upgrades.... These were a PITA to remove.. it took 3hrs to remove TWO SCREWS!!!!!!!!!! As you will see in the picture, The is a screw up against the windshield that was so close, a drill bit could BARELY fit.... After 3 full turns the bit would be flush against the glass and I had to use needle nose pliers to turn the rest for removal smh... But its done Here's the POS Tweeter that gave me HELL

This is a top view looking in the glass... notice the windshield wiper and that screw hole right under it...... yea, that was the POS screw that had took 3hrs of my life away LOL

[Wood]

Love the car, man! I can see you take pride in building cars.

Check out my project if you'd like.

Thank you! And I really do... I LOVE my baby haha....

And I actually have been Lurking on your build haha, you've done great work to your Honda bro!

[elflako17]

finally some dam updates lol

[Wood]

Alright, So here are my BEAUTIFUL components!! 6.5 Morel Maximo! (tweeters and crossovers aren't shown here but I will show them later in the log!)

Here's the door w/o the stock 6.5 in place

And here's something I took into account with this being my DD .... I decided to spend a couple extra $ so I don't ever have to worry about my adapters. These are custom molded PVC adapters machined for my car! That means I will not EVER have to worry about wood rotting in my doors!! Just a little extra attention to detail I accounted for when I designed my setup! Also I ran All SHCA 14Ga OFC Speaker wire thru all the stock boots to a "Disclosed Location" I will reveal later haha!!

And Here Is the 6.5 Mounted

And Also the tweeter! This Is actually a pretty Dope Picture of The Tweeter

[Wood]

finally some dam updates lol

Lol Bro, I been holding back haha... I'll be playing by the end of the week! FINALLY after 2yrs Bassless!!!!!!!!!

[Wood]

Here's a little side by side comparison of the Morels and the Stock Speakers....

[elflako17]

2 years with out bass that crazy nuts

[Wood]

Alright So the thing about the Altima is they designed the trunk with a slope so I had to get a false floor put in.... I actually had a Shop do it for me because I didn't have space on my apartment patio to do it, but Shoutout to "Mobile Sound Systems" in Arlington, Tx ... VERY professional and does THE BEST work in the Dallas-Fort Worth Metroplex that I've ever come across... They're evn 1 of 2 shops in the city to O-Scope your amps when they do your install! Anyways, Here's my false floor

That cutout is a cable, maybe to the fuel sensor... so the floor fits nice and snug and most of all Flat

[Wood]

Alright So the thing about the Altima is they designed the trunk with a slope so I had to get a false floor put in.... I actually had a Shop do it for me because I didn't have space on my apartment patio to do it, but Shoutout to "Mobile Sound Systems" in Arlington, Tx ... VERY professional and does THE BEST work in the Dallas-Fort Worth Metroplex that I've ever come across... They're evn 1 of 2 shops in the city to O-Scope your amps when they do your install! Anyways, Here's my false floor

That cutout is a cable, maybe to the fuel sensor... so the floor fits nice and snug and most of all Flat