ncc74656 Posted July 3, 2013 Report Posted July 3, 2013 everything was working fine last night and I went to start the truck this morning and my sub was not making any sound. I thought the wire came disconnected because the box move sideways but it did not. I plugged and iPod directly into the RCA's on the kicker and a known working speaker into the output. There is no sound coming out of the sub. The amps light comes on, the project light is off, all wiring is good but I can hear a faint buzzing noise from the amp. Thoughts? nothing, gutted
RooTxBeeR Posted July 3, 2013 Report Posted July 3, 2013 Might be blown. When I heard a light buzzing from my old amps they where dead. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
ncc74656 Posted July 3, 2013 Author Report Posted July 3, 2013 what part of your old amps died? Capacitors? Where can I buy parts for them? nothing, gutted
RooTxBeeR Posted July 3, 2013 Report Posted July 3, 2013 I only tried to fix one, and yes a resistor fried. I tried to fix it but then some other part failed. If it is for sure blown, I would send it to someone reputable to fix it On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
Hugh G. Rection Posted July 3, 2013 Report Posted July 3, 2013 I can hear a faint buzzing noise from the amp. Thoughts? make sure that buzzing noise isnt the fan inside the amp before you use that in an attempt to diagnose your problem. Owner of BigAss Ports
justin0943 Posted July 3, 2013 Report Posted July 3, 2013 lets see the guts to find out how many components got fried 02 dodge ram 1500 reg cab 3rd gen 2 sundown sd-2 d4 soundstream rub1.2500 amp all sky high car audio-fuse,fuse holder,wire,ring lugs and rca flex tech box design by Joe X supension-mcgaughys 2in drop spindal ,western chassis 6in flip kit,buddy custom c-notch 04 5.7l hemi motor swap and made it an slt eletric everthing youtube channel-http://www.youtube.c...43?feature=mhee http://www.stevemeadedesigns.com/board/topic/190882-02-dodge-ram-1500-3rd-gen/
ncc74656 Posted July 4, 2013 Author Report Posted July 4, 2013 ill pull it apart today, just got back into town so i gotta get some time to work on it. nothing, gutted
ncc74656 Posted July 4, 2013 Author Report Posted July 4, 2013 well i pulled it appart and it has black marks along the top side by the heat sinks and some melted resistors by the output terminals. the kx3 that stopped working has a blown cap and the PCB is melted by the fuse holder nothing, gutted
justin0943 Posted July 5, 2013 Report Posted July 5, 2013 take it to someone to repair it or buy a new one 02 dodge ram 1500 reg cab 3rd gen 2 sundown sd-2 d4 soundstream rub1.2500 amp all sky high car audio-fuse,fuse holder,wire,ring lugs and rca flex tech box design by Joe X supension-mcgaughys 2in drop spindal ,western chassis 6in flip kit,buddy custom c-notch 04 5.7l hemi motor swap and made it an slt eletric everthing youtube channel-http://www.youtube.c...43?feature=mhee http://www.stevemeadedesigns.com/board/topic/190882-02-dodge-ram-1500-3rd-gen/
ncc74656 Posted July 5, 2013 Author Report Posted July 5, 2013 kicker quoted me 50-175.00 to repair it and my xover. i sent pics to there email tech department. so im going to go that route i think nothing, gutted
Recommended Posts
Archived
This topic is now archived and is closed to further replies.